Audited Supplier
Rubber
Steel Toe, Slip-Resistant, Puncture-Resistant, Waterproof, Anti-Static, Insulative, Acid and Alkali
Rubber
Rubber
Steel
Waterproof
Acid and Alkali Resistant
Genuine Leather
Not Handmade
Unisex
Fire Fighting and Rescue
38-46
Ec
<3kg
HANTIAN
Carton
EC, CCS
Zhejiang, China
640590100
Product Description
Steel Toe & Midsole Fire Fighting Safety Work Labor Rain Footwear Rubber firefighter Boots
1.Fireman rubber boots Application
Firefighters protective rubber boots are firefighters conventional personal protective equipment.Wearing the boots can access to the general fire site, the scene of the accident for the fire fighting and rescue work.
2.Fireman rubber boots Main performance & parameters
Structure: firefighters protective rubber boots is mainly composed of two parts soles and boots, the main color is black, with yellow round bar, welt, etc.The whole of boot adopts multilayer structure.
Head of Boots with steel to improve the safety performance. Around the steel, has insulating rubber layer inside and outside, the sponge layer, insulating paper, foam and comfortable and comfortable cotton cloth lining, etc., which has the insulation and wearing comfortable.
Soles with steel bottom, in order to improve the puncture proof performance, bottom up and down in the steel has a comfortable rubber insulation, insulation paper, foam layer on both sides and interlock lining, outsole with rib can prevent slippery.
From uppers surface to openning, between the rubber layer and the interlock lining increased the sponge layer, good insulation, flame retardant, insulating, stays at the same time can improve the wearing comfort.
Weight: the quality of each pair firefighter protective rubber boots is less than 3 kg.
Fire Fighting Fireman rubber boots Physical and mechanical properties:
Fire Fighting Fireman rubber boots Features:
Specifications have 9 kinds of 39-45 code
Standard: Meet GA6-2004 standard for firefighters extinguishing protective boots.
1.Fireman rubber boots Application
Firefighters protective rubber boots are firefighters conventional personal protective equipment.Wearing the boots can access to the general fire site, the scene of the accident for the fire fighting and rescue work.
2.Fireman rubber boots Main performance & parameters
Structure: firefighters protective rubber boots is mainly composed of two parts soles and boots, the main color is black, with yellow round bar, welt, etc.The whole of boot adopts multilayer structure.
Head of Boots with steel to improve the safety performance. Around the steel, has insulating rubber layer inside and outside, the sponge layer, insulating paper, foam and comfortable and comfortable cotton cloth lining, etc., which has the insulation and wearing comfortable.
Soles with steel bottom, in order to improve the puncture proof performance, bottom up and down in the steel has a comfortable rubber insulation, insulation paper, foam layer on both sides and interlock lining, outsole with rib can prevent slippery.
From uppers surface to openning, between the rubber layer and the interlock lining increased the sponge layer, good insulation, flame retardant, insulating, stays at the same time can improve the wearing comfort.
Weight: the quality of each pair firefighter protective rubber boots is less than 3 kg.
Fire Fighting Fireman rubber boots Physical and mechanical properties:
| ITEM | INDEX | |
| Breaking strength MPa | rubber | Outter bottom |
| Elongation at failure % | ≥14.7 | ≥10.78 |
| Pull a permanent deformation % | ≥480 | ≥380 |
| Abrasion loss (akron)cm3/1.6km | ≤40 | -- |
| Strength (Shore A) | -- | ≤0.8 |
| Brittleness temperatureºC | 55-65 | 55-70 |
| The hot air aging(100ºC×24h) | ≤-40 | ≤-40 |
| Breaking strength decreased % | ≤35 | ≤35 |
| Flame retardant properties (GB/T13488) grade | FV-1 | FV-1 |
| The adhesive strength of uppers and fabric N/mm | 0.78 | -- |
| Shoe thickness mm | ≥1.5 | -- |
Fire Fighting Fireman rubber boots Features:
| Material | Polythene Rubber | steel plate pierce resistance | ≥1000N |
| Size | 38-46 | Oil-resistant Property | 10% |
| Weight | 3.0kg | Anti-smashing properties | static pressure≥15mm, impact ≥15mm |
| Highth | 34cm | Heat insulation property | ≤22C |
| Leakage current | <3Ma | Resistance to heat permeability | ≤22C |
| Slip resistance | ≥15º | Withstand voltage | ≥5000V |
Standard: Meet GA6-2004 standard for firefighters extinguishing protective boots.
