PE series jaw crusher is ideally suitable for primary and sec-ondary crushing. Its used in mining,metailurgy,construction,highway. railway.irigation and chemical industries,and our jaw crushers have the features of high reduction ratioeven powder sizes, low power consumption and easy maintenance.The crushing strength of the jaw crusher materials is up to 350Mpa






Features
1.Simple structure, easy maintenance;
2.High crushing ratio, even output granularity
3.High reliability,low investment;
4.Low noise, less dust.
1. PE jaw crusher
Model | Feed inlet size (mm) | Max. Feeding size (mm) | Adjusting range (mm) | Capacity (t/h) | Motor Power (kw) |
PE250×400 | 250×400 | 210 | 20-80 | 5-20 | 15 |
PE400×600 | 400×600 | 340 | 40-100 | 16-50 | 30 |
PE500×750 | 500×750 | 425 | 50-125 | 30-80 | 55 |
PE600×900 | 600×900 | 480 | 75-200 | 50-190 | 75 |
PE750×1060 | 750×1060 | 630 | 80-235 | 80-260 | 90 |
PE900×1200 | 900×1200 | 750 | 95-265 | 180-400 | 110 |
PE1000×1200 | 1000×1200 | 850 | 95-280 | 200-420 | 132 |
PE1200×1500 | 1200×1500 | 1000 | 160-320 | 280-700 | 180 |
PE1500×1800 | 1500×1800 | 1200 | 220-350 | 400-1000 | 315 |
PEX250×1000 | 250×1000 | 210 | 20-50 | 15-50 | 30 |
PEX250×1200 | 250×1200 | 210 | 20-60 | 20-70 | 37 |
PEX300×1300 | 300×1300 | 250 | 20-90 | 30-90 | 55 |
PEX500×1500 | 500×1500 | 400 | 40-110 | 60-180 | 90 |
2. PF Impact Crusher is used for primary, secondary and fine crushing of all kinds of stones and rocks with compressive strength less than 350 MPa such as granite, marble, and limestone. The Impact Crusher is widely used for sand and rock production in the industry of roads, railways, reservoir, electricity power, building materials and so on.


3. Symons cone crushers are usually suitable for the medium of the broken, -second or third broken section, widely used in mining, smelting, building materials, roads, railways, water and chemical industries and other fields of various minerals and rocks. Iron ore, copper ore, gold ore, manganese ore, river stone, gravel, granite, basalt, mine ore, quartz, diabase, etc. (for hard stone)
Model | Cavity | Max. Dia. Of crushing cone(mm) | Adjust range of opening (mm) | Feeding gate size when Min. Opening(mm) | Max. Feeding size(mm) | Capacity (t/h) | Power (kw) | Weight (t) |
PYSB-0910 | Standard fine | 900 | 9-22 | 102 | 85 | 45-91 | 75 | 12.3 |
PYSB-0917 | Standard coarse | 13-38 | 175 | 150 | 59-163 | 12.2 | ||
PYSB-0918 | Standard extra coarse | 25-38 | 178 | 150 | 118-163 | 12.2 | ||
PYSB-0904 | Short-head fine | 3-13 | 41 | 35 | 27-90 | 13.1 | ||
PYSB-0906 | Short-head medium | 3-16 | 60 | 51 | 27-100 | 13.3 | ||
PYSB-0907 | Short-head coarse | 6-19 | 76 | 65 | 59-129 | 13.3 | ||
PYSB-1313 | Standard fine | 1295 | 13-31 | 137 | 115 | 109-181 | 160 | 23.9 |
PYSB-1321 | Standard medium | 16-38 | 210 | 178 | 132-253 | 25.3 | ||
PYSB-1324 | Standard coarse | 19-51 | 241 | 205 | 172-349 | 23.5 | ||
PYSB-1325 | Standard extra coarse | 25-51 | 259 | 220 | 236-358 | 23.5 | ||
PYSB-1306 | Short-head fine | 3-16 | 64 | 54 | 36-163 | 23.1 | ||
PYSB-1308 | Short-head medium | 6-16 | 89 | 78 | 82-163 | 23 | ||
PYSB-1310 | Short-head coarse | 8-25 | 105 | 89 | 109-227 | 23.2 | ||
PYSB-1313 | Short-head extra coarse | 16-25 | 133 | 113 | 209-236 | 23.2 | ||
PYSB-1620 | Standard fine | 1676 | 16-38 | 209 | 178 | 181-327 | 250 | 45.8 |
PYSB-1624 | Standard medium | 22-51 | 241 | 205 | 258-417 | 45.4 | ||
PYSB-1626 | Standard coarse | 25-64 | 269 | 228 | 299-635 | 45.1 | ||
PYSB-1636 | Standard extra coarse | 38-64 | 368 | 313 | 431-630 | 45 | ||
PYSB-1607 | Short-head fine | 5-13 | 70 | 60 | 90-209 | 45 | ||
PYSB-1608 | Short-head medium | 6-19 | 89 | 76 | 136-281 | 44.9 | ||
PYSB-1613 | Short-head coarse | 10-25 | 133 | 113 | 190-336 | 44.8 | ||
PYSB-1614 | Short-head extra coarse | 13-25 | 152 | 129 | 253-336 | 44.7 | ||
PYSB-2127 | Standard fine | 2134 | 19-38 | 278 | 236 | 544-1034 | 400 | 86.7 |
PYSB-2133 | Standard medium | 25-51 | 334 | 284 | 862-1424 | 86.7 | ||
PYSB-2136 | Standard coarse | 31-64 | 369 | 314 | 1152-1814 | 86.7 | ||
PYSB-2146 | Standard extra coarse | 38-64 | 460 | 391 | 1252-1940 | 86.7 | ||
PYSB-2110 | Short-head fine | 5-16 | 105 | 89 | 218-463 | 89.5 | ||
PYSB-2113 | Short-head medium | 10-19 | 133 | 113 | 404-580 | 89.5 | ||
PYSB-2117 | Short-head coarse | 13-25 | 178 | 151 | 517-680 | 89.5 | ||
PYSB-2120 | Short-head extra coarse | 16-25 | 203 | 172 | 580-744 | 89.5 |


1. What is the raw material do you want to process?
Granite,limestone,pebble,basalts,etc.
2.What is the capacity tons per hour do you need?
100 t/h,etc.
3. What is the raw material input size?
400 mm
4. What is the output size of your product?
0-5mm;5-10mm;10-20mm,etc