Audited Supplier
600 X 400X 315mm
PP
Medium
Box
Storage
Living Room
600 X 400X 315mm
Various
25-30kg
China
No Mark
in Bulk
600 X 400X 315mm
China
39231000
Product Description
Plastic logistic container / storage box/plastic logistic box /turnover container/
Stackable and nestable container 600 X 400X 315mm
Features:
1) Materials: PP, PE
2) Volume: 50L
3) Load capacity: ≤ 30kg
4) Stack load: ≤ 150kg
5) Nesting Height: 90mm
6) Open Width: 490mm
7) Dimensions: 600 X 400X 310mm (Other Size is available upon request)
Conveyance: Qty/20' FCL: 756pcsQty/40' FCL: 1848PCS.
Qingdao Huading Imp. & Exp. Co., Ltd. has built a complete and mature production and inspection process, from the raw materials procurement, the finished products inspection to final product quality tracking, comprehensive monitoring product quality. With chemical analysis department, the physical inspection department, service department, we treat products quality as the lifeblood of enterprise.
Now we briefly list work procedure as follows,
Before production process
* Raw material selection
1) We purchase virgin material only from PetroChina,Sinopec and similar level suppliers,so raw material quality is guaranteed from source.We also have fixed and reliable source for recycled material.
2) Raw material would be inspected strictly before entering factory by our own laboratory.We have all sets of test equipment and technologist to support it.
After production process
* Five strict quality testing procedures: appearance view;specification measurement;weight measurement;load capacity test;impact resistance test and so on.
We list concrete content of each test procedures,
1) Appearance view:surface shall be level and smooth; no cracking and deformation;of unified hue; no clear color deviation for same batch of cargo; non-slip mat should be assembled; reinforced steel tubes shine ans amooth.
2) Specification measurement: +3/-6 mm allowance
3) Weight measurement: ± 0.5KG
4) Load capacity test: including static load test,dynamic load test and rack load test,at leat 48 hours.
5) Impact resistance test:Angle dropped down at least 3 times from shelf
We currently provide products to users performing the following technical standarrds:
Stackable and nestable container 600 X 400X 315mm
Features:
1) Materials: PP, PE
2) Volume: 50L
3) Load capacity: ≤ 30kg
4) Stack load: ≤ 150kg
5) Nesting Height: 90mm
6) Open Width: 490mm
7) Dimensions: 600 X 400X 310mm (Other Size is available upon request)
Conveyance: Qty/20' FCL: 756pcsQty/40' FCL: 1848PCS.
| Volume | dimensions | single Load Capacity | Stacking capacity | Volume/MPCS | ||
| External opening size | Internal opening size | Bottom inside dimension | kgs | kgs | m³ | |
| 19L | 400 X 300 X 260 | 350X 270 X 240 | 315 X 235 X 230 | 25 | 125 | 13 |
| 40L | 540 X 320 X 325 | 495 X 295 X 300 | 455 X 225 X 295 | 25 | 125 | 23 |
| 47L | 550 X 380 X 325 | 505 X 345 X 310 | 460 X 300 X 295 | 25 | 125 | 27 |
| 50L | 600 X 400 X 315 | 550 X 380 X 300 | 510 X 330 X 285 | 30 | 150 | 31 |
| 62L | 600 X 400 X 355 | 550 X 380 X 345 | 505 X 325 X 330 | 30 | 150 | 33 |
Quality Assurance
Qingdao Huading Imp. & Exp. Co., Ltd. has built a complete and mature production and inspection process, from the raw materials procurement, the finished products inspection to final product quality tracking, comprehensive monitoring product quality. With chemical analysis department, the physical inspection department, service department, we treat products quality as the lifeblood of enterprise.
Now we briefly list work procedure as follows,
Before production process
* Raw material selection
1) We purchase virgin material only from PetroChina,Sinopec and similar level suppliers,so raw material quality is guaranteed from source.We also have fixed and reliable source for recycled material.
2) Raw material would be inspected strictly before entering factory by our own laboratory.We have all sets of test equipment and technologist to support it.
After production process
* Five strict quality testing procedures: appearance view;specification measurement;weight measurement;load capacity test;impact resistance test and so on.
We list concrete content of each test procedures,
1) Appearance view:surface shall be level and smooth; no cracking and deformation;of unified hue; no clear color deviation for same batch of cargo; non-slip mat should be assembled; reinforced steel tubes shine ans amooth.
2) Specification measurement: +3/-6 mm allowance
3) Weight measurement: ± 0.5KG
4) Load capacity test: including static load test,dynamic load test and rack load test,at leat 48 hours.
5) Impact resistance test:Angle dropped down at least 3 times from shelf
We currently provide products to users performing the following technical standarrds:
ISO - International Standardization Organization
GB - Chinese National Stardard,
JIS - Japanese Industrial Standard,
ASTM - American society of testing Material standard,
DIN - Germany Industrial standard
GB - Chinese National Stardard,
JIS - Japanese Industrial Standard,
ASTM - American society of testing Material standard,
DIN - Germany Industrial standard
Others: We would like to receive customer's specific standard and manufacture on request.
