Audited Supplier
13x molecular sieve
Granules
Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
Gray
Removal of H2O, Mercaptans, Sulphur Compounds
Zeolite
Available
Available
XINGFENG
Steel Drum, Carton Drum, Carton Box, Kraft Bag.
1.7-2.5mm, 3.0-5.0mm, 1.6mm, 3.2mm
China
3824999990
Product Description
Sulfur Removal from Aerosole or LPG Molecular Sieve 13X
Description:
Molecular Sieve type 13X is a kind of alkali-metallic, silicon-aluminum compounds, it could absorb the molecule which critical diameter is not more than 9 angstroms.
Technical Parameter:
Application:
Molecular sieve can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppmv.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Packing and Shipping:
Description:Molecular Sieve type 13X is a kind of alkali-metallic, silicon-aluminum compounds, it could absorb the molecule which critical diameter is not more than 9 angstroms.
Technical Parameter:
| Properties | Unit | Sphere | Pellet | ||
| Size | mm | 1.6-2.5 | 3-5 | 1/16" | 1/8" |
| Static Water Adsorption | ≥mg/g | 265 | 265 | 270 | 270 |
| CO2 Adsorption | ≥mg/g | 180 | 180 | 180 | 180 |
| Bulk Density | ≥g/ml | 0.67 | 0.66 | 0.62 | 0.62 |
| Crushing Strength | ≥N | 30 | 80 | 30 | 65 |
| Attrition Rate | ≤wt% | 0.1 | 0.1 | 0.1 | 0.1 |
| Package Moisture | ≤wt% | 1.5 | 1.5 | 1.5 | 1.5 |
Application:
- Applied in removing water, carbon dioxide and hydrocarbons from feed gas in air pre-purification units prior to the cryogenic air separation;
- Removal of water, hydrogen sulfide, mercaptan and high molecular weight sulfur compounds in NGL, LPG, and liquid hydrocarbons (e.g. propane, butane);
- Deep dehydration of compressed air, instrument air and inert gas;
- Dehydration and purification of ammonia synthesis gas;
- Removal of odorous sulfur compounds from aerosol propellants;
- Removal of carbon dioxide from cracked gas;
- Used for rich oxygen generation, oxygen/nitrogen separation in PSA/VSA air separation processes;
- Production of medical oxygen in small scale oxygen concentrators.
Molecular sieve can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppmv.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Packing and Shipping:
