Audited Supplier
SH-MBF-A15
Omnidirectional Antenna
690-2700MHz
Receiving Antenna
Surface Antenna
Communication Antenna
Base Antenna
<1.5
15 dBi
Vertical
100W
N Female or Requested
DC Ground
Pole-Holding
D35-50mm
High Gain Antenna
One-Dimensional Antenna
Sunhans
Carton
D50x250
China
Product Description
Sunhans 15dBi 698-960MHz/ 1710-2700MHz 4G Mobile Signal Booster Omni Antenna with Waterproof
Point-to-multipoint system
Testing Report,VSWR Curve
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
Feature:
- Exquisite appearance.
- Good impact resistance,waterproofing and anti-corrosion ability.
- Full day working.
- Optimized dimension.
- High gain,low standing wave,strong anti-interference ability.
Application
GSM/CDMA/PCS/3G/4G/WLAN systemPoint-to-multipoint system
| SH-MBF-A15 Electrical Specifications | |
| Frequency range(MHz) | 690~2700 |
| Gain(dBi) | 15 |
| Half-power beam width(°) | H:360 V:55/30 |
| VSWR | ≤1.5 |
| Input Impedance(Ω) | 50 |
| Polarization | Vertical |
| Maximum input power(W) | 100 |
| Lightning protection | DC Ground |
| Input connector type | N Female or Requested |
| Mechanical Specifications | |
| Dimensions (mm) | Φ50*250 |
| Antenna weight(kg) | 0.5 |
| Operating temperature(°c) | -40~60 |
| Rated Wind Velocity(m/s) | 60 |
| Radome color | White |
| Mounting way | Pole-holding |
| Mounting hardware(mm) | ¢35-¢50 |
Testing Report,VSWR Curve
Antenna Installation Instructions
1. Install as the picture below2. Installation Steps
1. Place the M6 U-shape screw through the holes on the clamps to mount the antenna to the pole whose outer diameter is ¢35~¢50mm.Then put on the flat washer,the spring washer and twist all the nuts.
2.There should be at least three meters between the ground or floor and the antenna above.No huge building or metal object or any other obstacle or shelter nearby.
3.Adjust the mounting height of the antenna to the proper position to receive the best signal,then seal all the connections.
4.Please pay attention to lightning protection.
1. Place the M6 U-shape screw through the holes on the clamps to mount the antenna to the pole whose outer diameter is ¢35~¢50mm.Then put on the flat washer,the spring washer and twist all the nuts.
2.There should be at least three meters between the ground or floor and the antenna above.No huge building or metal object or any other obstacle or shelter nearby.
3.Adjust the mounting height of the antenna to the proper position to receive the best signal,then seal all the connections.
4.Please pay attention to lightning protection.
About us
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
