Audited Supplier
2.4GHz, Max. 10W big output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; small size, protable;
Designed for supermarkets, parking spaces, office, ...
Cell phone Amplifier Description: 10W 2.4Ghz 40dBm WiFi Signal Booster Outdoor
| SKU | 0305SH100185 |
| Model | SH24Gi10W |
| Operating Range | 2400~2500MHz |
| Channel width | 20Mhz & 40Mhz |
| Supported standards | IEEE 802.11b/g/n |
| Operating Mode | Bi-directional, half-duplex, time division duplex |
| Connector type | To radio SMA female (hole inside). To antenna RP-SMA female (pin inside) |
| Input power | 0~26dBm (Note: If the input power is greater than 20DBM, it needs to be explained in advance with the supplier, so that the manufacturer can adjust the equipment.) |
| Transmit gain | 22dB |
| Output Power | 10W (40dBm) |
| Receiver Gain | ≤ 20 dB |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | N-K female |
| Power supply | 24V/2A DC, 100~240V |
| Operating Temperature | -25°C to + 55°C |
| Operating Humidity | Up to 75% relative humidity |
| Material | Cast Aluminum |
| LED light | Power status / activity status LED |
| Booster Size | 15.2 x 7.3 x 2.6cm |
| Booster Weight | 645g |
Package contents:
1 x feeding box
1 x power supply
1 x user manual
2. Increase range by providing transmit gain as well as lownoise receive gain. This receive gain increase the receive sensitivity of wireless LAN.
3. Access point.Full output power of 10W is achieved with only 36 mW input into the WiFi signal booster.
Application:
2.4GHz 10w 40dBm is indoor wifi signal booster/amplifier/repeater is used for Bluetooth system; Robotics for beach and flood rescue;
For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
Solution: Hot Spot solutions,Access points,Smart home systems
| Features: |
| 1. Easy Installation. |
| 2. Plug and play, no software setup. |
| 3. 3.5dB ultra-low noise. High Gain, High Value, High Performance. |
| 4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times. |
| 5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied. |
| 6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc. |
| 7.Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g and 802.11n (2.4 GHz mode only). |
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About us
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
