Audited Supplier
Features:
New design for simple,simple,simple
Excitingly small! Only 77g!
5-16V wide voltage range;support different power supply;
2.4G &5.8G dual band, Auto switch frequency;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....
Cell phone Amplifier Description: 2000mW 2.4Ghz & 5.8GHz 33dBm WiFi Signal Booster
| SKU | 0305SH200784 |
| Model | SHRC5824G2WP1 |
| Operating Range | 2.4~2.5 GHz, 5.0~5.875 GHz |
| Operating Mode | Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode |
| Input power | 0~20 dBm |
| Transmit gain | 15-18dB |
| Output Power | 2W (33dBm) |
| Receiver Gain | ≤ 12 dB |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | SMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA female(pin inside) |
| Power supply | 5V~16V/2A DC |
| Operating Temperature | -20°C to + 70°C |
| Operating Humidity | Up to 75% relative humidity |
| Material | Cast Aluminum |
| Booster Size | 9.7 x 5.2 x x1.1cm |
| Booster Weight | 77g |
All specifications of PA can be customized based on customer requirement.
SHRC58G2WP 5.8ghz 2w 33dBm is specially designed for UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on.
| Features: |
| 1. Easy Installation |
| 2. Plug and play, no software setup. |
| 3. 3.5dB ultra-low noise |
| 4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times. |
| 5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied |
| 6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc. |
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.
3. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
Package contents:
1 x DC 2.5" to USB adapter
1 x DC 2.5" to JST adapter
1 x Mounting Velcro
1 x User Manual
About us
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
