Audited Supplier
| Package Size | 30.00cm * 30.00cm * 35.00cm |
| Package Gross Weight | 2kg |
| Time | 15days |
Model: SUP 20 T
Protective Lens: D18*2
Focusing lens:D20*4.5 F150
Collimating Lens:D20*5 F60
Reflector:30*14 T2
Seaing Ring:18.5*21*1.7
Sealing element:18.5*20*5*1.7
Weight:0.75KG
1.Basic features: self-developed three-in-one control system, flexible switching between welding, cleaning and cutting, setting multiple safety alarms, simple and flexible operation.
2.More stable: all parameters are visible, real-time monitoring of the status of the whole machine, avoiding problems in advance, convenient for troubleshooting and problem solving, ensuring stable system work.
3.Process: Process parameters can be set, and it is flexible to try various process effects.
4.Stable and highly repeatable parameters: With the determined nozzle air pressure and lens status, as long as the laser power is stable, the process parameters will be repeatable, which greatly improves the efficiency.
(1) Make sure the whole machine shell is reliably grounded before power supply.
(2) The laser output head is connected to the welding head. When using the laser output head, please check the laser output head carefully to prevent dust or other contamination, and use special lens paper when cleaning the laser output head.
(3) If the equipment is not used in accordance with the methods specified in this instruction manual, it may be in an abnormal operating condition and cause damage.
(4) When replacing the protective lens and focusing lens, make sure that you protect them properly.
(5) Please note: When using the unit for the first time, be sure not to press the trigger to emit light when red light cannot come out of the copper nozzle.
