Audited Supplier
T-6
a Year
a Year
10-30m
>400 L/min
Motor
Cast Iron
Single-stage Pump
Liquid Pumps
Electric
Electric Pump
Sewage Pump
Mechanical Pump
Sewage Pumps
Centrifugal Pump
7.6 M
76 mm
IP55
Open Type
lanrise
Plywood
2" 3" 4" 6" 8" 10"
China
8413200000
Product Description
Product Description
Super T Self-Priming Trash Pump are designed for economical & trouble-free operation in handling solids-laden liquids and slurries. Pumps feature a large volute design which allows them to re-prime automatically in a completely open system without the need of suction or discharge check valves. And this is workable with the pump only partially filled with liquid and completely dry suction line.
Pumps will be able to handle up to 75mm spherical solids, depending on pump models. In case that pump shaft or bearings need service or repair, the entire rotating assembly can be removed without disturbing pump casing or pipelines.
Offering the same reliability and performance as the ST self-priming pump, the Super T pump provides additional advanced design features such as external shimless adjustment, dual protection of bearings and an "easy-grip" cover plate handle. The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system, whether it's a small sub-division or a large waste collection system.
Features
External Shimless Adjustment
The external shimless cover plate allows for easy adjustment of the clearance between the impeller and the wearplate. This process eliminates the need to realign belts, couplings or other drive components. In turn, the working height of the seal assembly and impeller back clearance are not disturbed. The unique collar and adjusting screw allow for incremental adjustments of the wearplate clearance with the turn of a hand. Once adjustments have been made, the collar locks in place maintaining the clearance setting even if the cover plate is removed. This design doubles the life of the impeller and wearplate, and keeps the pump operating at maximum efficiency.
Solids Handling
Exclusive Mechanical Seal
Exclusive double-floating, self-aligning, oil lubricated mechanical cartridge seal with stationary and rotating face of silicon carbide or tungsten titanium carbide is specifically designed for abrasive industrial service. Seal is available on 3", 4" and 6" (75 mm, 100 mm and 150 mm) pump models. Optional seals are also available.
Removable Cover Plate with "Easy-Grip" Handle
The removable cover plate with "easy-grip" handle and pusher bolt capability provides quick and easy access to the pump interior without disconnecting piping. Clogs can be removed and the pump can be returned to service in minutes. Impeller, seal, wearplate and flap valve can also be accessed through coverlet opening for inspection or service.
Removable Rotating Assembly
Dual Protection of Bearings
Atmospheric isolation of seal cavity provides positive protect of bearings. This unique design also provides capabilities for external monitoring.
Super T Self-Priming Trash Pump are designed for economical & trouble-free operation in handling solids-laden liquids and slurries. Pumps feature a large volute design which allows them to re-prime automatically in a completely open system without the need of suction or discharge check valves. And this is workable with the pump only partially filled with liquid and completely dry suction line.
Pumps will be able to handle up to 75mm spherical solids, depending on pump models. In case that pump shaft or bearings need service or repair, the entire rotating assembly can be removed without disturbing pump casing or pipelines.
Offering the same reliability and performance as the ST self-priming pump, the Super T pump provides additional advanced design features such as external shimless adjustment, dual protection of bearings and an "easy-grip" cover plate handle. The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system, whether it's a small sub-division or a large waste collection system.
Features
External Shimless Adjustment
The external shimless cover plate allows for easy adjustment of the clearance between the impeller and the wearplate. This process eliminates the need to realign belts, couplings or other drive components. In turn, the working height of the seal assembly and impeller back clearance are not disturbed. The unique collar and adjusting screw allow for incremental adjustments of the wearplate clearance with the turn of a hand. Once adjustments have been made, the collar locks in place maintaining the clearance setting even if the cover plate is removed. This design doubles the life of the impeller and wearplate, and keeps the pump operating at maximum efficiency.
Solids Handling
Two-vane, semi-open solids handling impeller handles up to 3" (76mm) diameter solids, depending on pump model. Pump out vanes on impeller shroud reduce foreign material buildup behind impeller and reduce pressure on seal and bearings.
Exclusive Mechanical Seal
Exclusive double-floating, self-aligning, oil lubricated mechanical cartridge seal with stationary and rotating face of silicon carbide or tungsten titanium carbide is specifically designed for abrasive industrial service. Seal is available on 3", 4" and 6" (75 mm, 100 mm and 150 mm) pump models. Optional seals are also available.
Removable Cover Plate with "Easy-Grip" Handle
The removable cover plate with "easy-grip" handle and pusher bolt capability provides quick and easy access to the pump interior without disconnecting piping. Clogs can be removed and the pump can be returned to service in minutes. Impeller, seal, wearplate and flap valve can also be accessed through coverlet opening for inspection or service.
Removable Rotating Assembly
Inspection of pump shaft or bearings is easily accomplished without disturbing pump casing or piping by removing rotating assembly. Simply remove four bolts from the back of the pump and the assembly slides out.
Dual Protection of Bearings
Atmospheric isolation of seal cavity provides positive protect of bearings. This unique design also provides capabilities for external monitoring.
Super T Series Self-Priming Trash Water Pump performance parameter
Inlet/Outlet | 2''(50mm), 3''(80mm), 4''(100mm), 6''(150mm), 8''(200mm), 10''(250mm), 12''(300mm) |
Impeller Diameter | 158.74mm-457.2mm |
Material | cast iron, ductile iron, stainless steel,CD4MCU,aluminum,bronze |
Flow Rates | 8m3/h-1275m3 /h or 20GPM-5500GPM |
Head | 6 - 63mm |
Solid Passing | 20.63mm-76.2mm |
Diesel Driving | Water cooled or air cooled |
Method of Connection | Self-priming pumps are available as basic units or may be flexcoupled, V-belt driven or engine mounted. |
