Designed with a compact turning radius, the UPS-20J excels in maneuverability, making it exceptionally convenient for navigating tight and confined spaces.
Boasting a remarkable shotcreting volume of up to 20m³/h, the UPS-20J exemplifies superior shotcreting efficiency with its innovative pipe blockage-proof design.
Featuring a robust diesel and electric dual system, this vehicle ensures seamless electric construction operations and reliable diesel emergency response, guaranteeing uninterrupted construction progress.
The UPS-20J's optimized and upgraded structural design ensures a low failure rate, high compatibility with accessories and consumables, and minimal operational costs, delivering exceptional reliability and cost-efficiency.
Equipped with wireless remote control, the UPS-20J offers precise manipulation of the mechanical arm, ensuring swift, efficient, safe, and energy-saving operations.
Fitted with a generous 400L accelerator tank, this vehicle meets the demanding construction volume requirements for large sections effortlessly.
Max mumoveralldimension(L×W×H) | 7830×2000×2520mm |
Self-weight | 12.5t |
Operatingmode | Electric system + diesel engine emergency response system |
Operatingrange(W×H) | 15×8.5m |
Maximumshotcretingvolume | 20m³/h |
Controlmode | The boom adopts wireless remote control |
Chassis model | Self-made engineering vehicle chassis |
Engine | Cum mins |
Power | 110kW |
Wheelbase | 3540mm |
Maximum travel speed | 17km/h |
Maximum gradeability | 25° |
Minimum outer turning radius | 6301mm |
Minimum inside turning radius | 3768 mm |
Minimum ground clearance | 408mm |
Structural form of boom | Three-section arm two-stage telescopic |
Maximum spray height | 8.5m |
Maximum spray width | 2×7.5m |
Boom pitch angle | -30°~+50° |
Boom slewing angle | 0~270° |
Axial rotation of spray nozzle seat | 360° |
Axial swing of spray nozzle seat | 240° |
Deflection angle brushing of spray nozzle | 8° ×360° continuous |
Total motor power | 45kW |
Number of cylinders | 2 |
Cylinder (cylinder diameter X stroke) | 90mm×800mm |
Concrete cylinder (cylinder diameter × stroke) | 160mm×800mm |
Pumping line | 125-80 reducer pipe |
Maximum size of sprayed aggregate | 25mm |
Maximum pumping volume | 20m³/h |
Hopper capacity | 0.35m³ |
Material receiving height | 1310mm |
Air compressor displacement | 10.5m³/min,45kW |
Working pressure of air compressor | 0.7MPa |
Admixture system displacement | 620L/h |
Admixture system pressure | 1MPa |
Volume of accelerator tank | 400L |