Audited Supplier
2520, 2205.2507 904L
Seamless
Cold Drawn
S31500, S31803, 2205, Uns S32750, 904L
Annealed and Pickled
Mining
Round
Xindeda
Wooden Box
Wenzhou, China
Product Description
Product Name: SAF 2507 Super Duplex Stainless Steel Pipe/Tube
Standard: ASTM A789,ASTM A790, ASTM A213, A269, A312, A511, A789, A790, A376, EN 10216-5, EN 10297,DIN 17456, DIN 17458,JISG3459, JIS GS3463, GS3467, JIS G3448, GOST 9940, GOST 9941,GB/T 21833
Material: S32750 SAF2507 F53 1.4410 X2CrNiMoN25-7-4 , S32760 1.4501 F55 X2CrNiMoCuWN25-7-4 , UNS S31803, UNS 32160, UNS S32205
Nominal Diameter: 1/2 "to 32" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
Standard: ASTM A789,ASTM A790, ASTM A213, A269, A312, A511, A789, A790, A376, EN 10216-5, EN 10297,DIN 17456, DIN 17458,JISG3459, JIS GS3463, GS3467, JIS G3448, GOST 9940, GOST 9941,GB/T 21833
Material: S32750 SAF2507 F53 1.4410 X2CrNiMoN25-7-4 , S32760 1.4501 F55 X2CrNiMoCuWN25-7-4 , UNS S31803, UNS 32160, UNS S32205
Nominal Diameter: 1/2 "to 32" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
| Chemical Composition | |||||||
| GRADE | C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Ni ≤ | Cr ≤ |
| 304 | 0.07 | 0.75 | 2.00 | 0.045 | 0.03 | 8.00-10.50 | 17.50-19.50 |
| 304L | 0.03 | 0.75 | 2.00 | 0.045 | 0.03 | 8.00-12.00 | 17.50-19.50 |
| 310S | 0.08 | 1.50 | 2.00 | 0.045 | 0.03 | 19.00-22.00 | 24.00-26.00 |
| 316 | 0.08 | 0.75 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
| 316L | 0.03 | 0.75 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
| 321 | 0.08 | 0.75 | 2.00 | 0.045 | 0.03 | 9.00-12.00 | 17.00-19.00 |
| Inspection & Test |
| 1.100% PMI, Spectro Chemical Analysis Test for Raw Material |
| 2.100% Dimension & Visual Examination |
| 3. Mechanical Properties Test Include Tension Test Flattening Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test |
| 4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT) |
| 5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor) |
| 6.Straightness Test (optional) |
| 7.Roughness Test (optional) |
| 8.Intergranular Corrosion Test(optional) |
| 9.Impact Test (optional) |
| 10.Grain Size Determinations (optional) |
| NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION. |
