Audited Supplier
MFP-2C
Surface Mounting
Resistive
Contact
Analog Type
Integration
Ceramics
Temperature
IP56
RoHS
Customized
Jingpu brand
Standard Export Packing
2meters
Hefei, Anhui, China
9025191010
Product Description
Surface mount temperature sensor probe 5K 10K 20K 50K 100K NTC thermistor
Product Description:
Surface mount temperature sensor probe 5K 10K 50K 100K be consist of the insulated wire (PTFE cable & PVC insulated wire, XLPE issulated wire), NTC chip, epoxy resin and ring lug M2/M4/M6. The optional resistance value range from 0.3KΩ to 2000KΩ, and beta value range from 2500K to 4500K. The surface mount temperature sensor probe be widely used for battery pack, solar inverter, YF, welding machine, control cabinet etc.
Features:
Comply for RoHS standard
miniature designed
Interchangeability
surface mount temperature measurement
PVC insulated lead wires series Operating temperature range: -20ºC~105ºC
PTFE insulated lead wires series Operating temperature range: -40ºC~150ºC
Sensing element electrically isolated from tag
Eyelets to fit M3, M4&M5 screw sizes
Range of wire lengths 1.97 in to 78.74in (50mm to 2000mm)
Application:
EV/HEV Bus Bars
Battery Covers
Power Distribution
Thermal Management
Heat Sinks
Panel Enclosures
Inverters
Welding machine
Control cabinet
Structure & Dimensions
Standard packing (inner packing): 1pcs~100pcs/polybag
Operation Notice
5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated.
Product Description:
Surface mount temperature sensor probe 5K 10K 50K 100K be consist of the insulated wire (PTFE cable & PVC insulated wire, XLPE issulated wire), NTC chip, epoxy resin and ring lug M2/M4/M6. The optional resistance value range from 0.3KΩ to 2000KΩ, and beta value range from 2500K to 4500K. The surface mount temperature sensor probe be widely used for battery pack, solar inverter, YF, welding machine, control cabinet etc.
Features:
Comply for RoHS standard
miniature designed
Interchangeability
surface mount temperature measurement
PVC insulated lead wires series Operating temperature range: -20ºC~105ºC
PTFE insulated lead wires series Operating temperature range: -40ºC~150ºC
Sensing element electrically isolated from tag
Eyelets to fit M3, M4&M5 screw sizes
Range of wire lengths 1.97 in to 78.74in (50mm to 2000mm)
Application:
EV/HEV Bus Bars
Battery Covers
Power Distribution
Thermal Management
Heat Sinks
Panel Enclosures
Inverters
Welding machine
Control cabinet
Structure & Dimensions
Standard packing (inner packing): 1pcs~100pcs/polybagOperation Notice
- Application:Temperature measure and control;
- The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.
- Avoid excessive heat shock,The hot air blow shoul d beat least 30mm to the probe in case heat shrink protection tube need to be attached.
- Storage Temperature -10ºC~40ºC,≤75%RH;Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.
5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated.
