Audited Supplier
High Manganese Casting Parts
for Symons,Sadvik ,Pegson,Telsmith and Nordberg Crushers,the crusher spares fit to your crushers guaranteed. Replace the original directly 100% zero defect.Dimensions 100% same as the original part.Main Products:
Crusher Bushing,Socket Liner,Piston Step Bearing,Eccentric Bushing,Main Shaft Step Bearing,Crusher Countershafte,Cone Crusher Upper Frame,Bottom Shell Bushing,Top Shell,Bottom Shell,Main Frame ,Adjustment Ring, Head Assy,Bowl,Drive Gear ,Counterweight assy ,Shaft ,Pitman ,Bronze Bushing ,Pump ,Tramp Release Cylinder ,Protection Bushing ,Gear and Gear & Pinion ,Jaw Crusher Fixed Jaw,Movable Jaw,Cone Crusher Mantle,Concave,Bowl Liner.Seals,Spring ,Wedge ,Toggle Plate ,and Etc .but not limited what we mentioned these at above.
| Our Capacity: |
| a: Centrifugal Casting: Diameter under 4500mm b: Continuous Casting: Diameter under 300mm c: Sand Casting: Diameter under 5000mm d: Output:30ton/day e: Finished Machining output :15ton f: Other special shaped parts can use other methods of casting or shaped moulds. |
OEM Crusher Parts for Crusher Model:
GP Series:
GP100 ,GP100S ,GP200,GP200s,GP300,GP300S,GP500,GP500S,GP550,GP11F,GP11M,GP220,GP330
S Series:
S2800(CS420),S3800(CS430),S4800(CS440),S6800(CS660).
| Cu Main Material | |||||||||
| Cu | Sn | Zn | Pb | Fe | Al | Mn | P | Ni | |
| C93700 | 78-82 | 9-11 | 8-11 | ||||||
| C93200 | 81-85 | 6.3-7.5 | 1-4 | 6-8 | 1 | ||||
| C95400 | >83 | 3-5 | 10-11.5 | 0.5 | 1.5 | ||||
| C95500 | >78 | 3-5 | 10-11.5 | 3.5 | 3-5 | ||||
| C90700 | 88-90 | 10-12 | |||||||
| C95300 | >86 | 0.8-1.5 | 9-11 | ||||||
| C95800 | >79 | 3.5-4.5 | 8.5-9.5 | 0.8-1.5 | 4-5 | ||||
| C93600 | 79-83 | 6-8 | 1 | 11-13 | 1 | ||||
| C86300 | 60-66 | 22-28 | 2-4 | 5-7.5 | 2.5-5 | ||||
| C83600 | 84-86 | 4-6 | 4-6 | 4-6 | 1 | ||||
On Time Delivery
Customer Satisfaction
OEM Quality of Products
Quick Inquiry Response within 12hours
Inspection:
1.Chemical Compositions Test
2.Mechanical Properties Test
(Tensile Strength, Yield Strength, Elongation, Reduction of Area, Impact Value, Hardness)
3.Non Destructive Test (UT, MT, PT, RT)
4.Dimensional Checking
Process Flow:
We will bear the repair cost or send the replacement parts if the quality problem.
Q. What's your advantage?
A: On Time Delivery /Customer Satisfaction
OEM Quality of Products /Quick Inquiry Response within 12hours
High-quality control and fast delivery with the most competitive price
Q. What's the warranty on your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
Q. What's your delivery time?
A: Within 15-35 days after we confirm your requirement.
Q. What's the payment terms?
A: T/T,100% L/C at sight are all accepted.
