Audited Supplier
SZS10-1.25-Y. Q SZS15-1.25-Y. Q SZS20-1.25-Y. Q
Steam Boilers, Oil Boiler
Gas-Fired
Packaged Boiler
Fire Tube
Steam and Water
Forced Circulation
Horizontal Boiler
Pressure
A
Chamber Combustion Boiler
Industrial, Home, Vehicle, Power Station
REACH BOILER
Naked with Plastic Film
China Henan
8402190000
Product Description
Main Features
SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. The body is fixed on the basement by middle and both end flexible supports and make the boiler expand horizontally sideways. Around the furnace is membrane water cooling tube wall. Furnace and tube bank are totally separated by the membrane water tube cooling wall at the left side of the furnace. The back part of bundle is sparse shift structure, front part is aligned structure. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.
Model:SZS Type Gas/Oil Fired Steam Boiler
Structure:WaterTube Three Pass
Rated Steam Capacity:10-50 ton/hr
Rated Steam Pressure:1.25/1.6/2.5 Mpa
Rated Steam Temperature:194/205/220C
Application:Textile Mill,Food and Beverage,Chemical,Medicine,Light Industry,Rubber,Printing and Dyeing Plant,Paper Mill,Wood Processing,Garment and Laundry etc.
Model No. | SZS10-1.25-Y/Q SZS10-1.6-Y/Q SZS10-2.5-Y/Q | SZS15-1.25-Y/Q SZS15-1.6-Y/Q SZS15-2.5-Y/Q | SZS20-1.25-Y/Q SZS20-1.6-Y/Q SZS20-2.5-Y/Q | SZS25-1.25-Y/Q SZS25-1.6-Y/Q SZS25-2.5-Y/Q | SZS30-1.25-Y/Q SZS30-1.6-Y/Q SZS30-2.5-Y/Q | SZS35-1.25-Y/Q SZS35-1.6-Y/Q SZS35-2.5-Y/Q | SZS40-1.25-Y/Q SZS40-1.6-Y/Q SZS40-2.5-Y/Q |
Rated Evaporation (T/h) | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
Rated Pressure (Mpa) | 1.25/1.6/2.5 | 1.25/1.6/2.5 | 1.25/1.6/2.5 | 1.25/1.6/2.5 | 1.25/1.6/2.5 | 1.25/1.6/2.5 | 1.25/1.6/2.5 |
Rated Steam Temp. (ºC) | 194/205/220 | 194/205/220 | 194/205/220 | 194/205/220 | 194/205/220 | 194/205/220 | 194/205/220 |
Efficiency | >98% | >98% | >98% | >98% | >98% | >98% | >98% |
Diesel Consumption (Kg/h) | 583 | 868 | 1148 | 1439 | 1739 | 2030 | 2318 |
Natural Gas (Nm³/h) | 704 | 1045 | 1383 | 1739 | 2090 | 2450 | 2787 |
Weight (T) | 31 | 41 | 49 | 53 | 65 | 72 | 81 |
Overall dimensions (L*W*D(mm)) | 7050*3350*3400 | 8700*3350*3400 | 9400*3600*3600 | 11000*3600*3800 | 11000*3800*4000 | 12000*4000*4200 | 12400*4400*4600 |
Technical Advantages
Safety
Boiler body uses the forced circulation in the high temperature area to make sure all heating areas can be cooled down and avoid vaporization; The explosion door and flame detector are equipped for safe and reliable operation. Comb plates are used between both sides of boiler and tube bundle to avoid leakage of condensate and gas caused by using refractory concrete as sealing material. Air proof test is done before delivery in the factory to guarantee any gas leakage problem.
Environmental protection
Big combustion chamber equipped with Low emission combustion burner effectively reduce the NOx to 30mg/m3. Smoke duct and smoke outlet use internal insulation to reduce operating noise.
Combustion chamber uses full membrane water cooling wall structure and pressurized combustion without smoke mixture.
Energy conservation
Good quality alumina silicate fiber and fire clay insulation material are used and the boiler body temperature is controlled below 45ºC and greatly heat loss is reduced. Combustion chamber is designed with narrow distance tube membrane water cooling wall which has good air proof to reduce heat lost and increase boiler thermal efficiency. Internal inspection holes uses high-alumina refractory and manhole cover seal devices, solving superheat problem in this part caused by using refractory bricks.
Convenience
Manholes are placed on the front and back side of drums and inspection doors on back side of boiler easy to open for inspection and clean inner and outer parts.
Longer lifespan
Membrane structure are used in the front and back wall for boiler body and highly increased their lifespan to over 20 years.
The key processes including material cutting, rolling, drilling are done by advanced CNC machining process to reduce the assembly stress and extend boiler service lifetime.
Flutter prevention fastener is used for high temperature part convection tubes, which avoid convection tube cracking problem.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will be tested by radiographic inspection.
Combustion chamber uses full membrane water cooling wall structure and pressurized combustion without smoke mixture.
Energy conservation
Good quality alumina silicate fiber and fire clay insulation material are used and the boiler body temperature is controlled below 45ºC and greatly heat loss is reduced. Combustion chamber is designed with narrow distance tube membrane water cooling wall which has good air proof to reduce heat lost and increase boiler thermal efficiency. Internal inspection holes uses high-alumina refractory and manhole cover seal devices, solving superheat problem in this part caused by using refractory bricks.
Convenience
Manholes are placed on the front and back side of drums and inspection doors on back side of boiler easy to open for inspection and clean inner and outer parts.
Longer lifespan
Membrane structure are used in the front and back wall for boiler body and highly increased their lifespan to over 20 years.
The key processes including material cutting, rolling, drilling are done by advanced CNC machining process to reduce the assembly stress and extend boiler service lifetime.
Flutter prevention fastener is used for high temperature part convection tubes, which avoid convection tube cracking problem.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will be tested by radiographic inspection.
Henan Reach Special Equipment Co., Ltd. is located in the central city of Zhengzhou, Henan Province, China. Our company is a professional trade supplier of industrial equipment such as boilers, with 12 production companies with various qualifications and over 30 employees. Mainly engaged in the design and sales of oil and gas steam boilers, coal/biomass steam boilers, oil and gas thermal oil boilers, coal/biomass thermal oil boilers, electric heating steam boilers, oil and gas hot water boilers, and medium and high temperature hot air furnaces. The manufacturers our company collaborates with are all legitimate production enterprises with A-level and B-level qualifications for Chinese boiler manufacturing. They have various certifications both domestically and internationally, including CE certification, ASME certification, etc., which can fully meet the matching requirements for boilers in various production environments in different countries. The factories our company collaborates with are all based on the manufacturing and production of various pressure vessels such as steam boilers, thermal oil boilers, and autoclaves. We have established an industrial system that integrates product development, engineering project design, equipment manufacturing, engineering installation, system debugging, pre-sales, sales, and after-sales services. Our company's products are not only sold and widely praised in the domestic market of China, but also exported to more than 60 countries and regions such as South Korea, Vietnam, Myanmar, Mongolia, the Philippines, and Indonesia, receiving recognition and pursuit from customers. I believe that our company can bring objective benefits to customers with advanced technology, excellent equipment, excellent products, and exquisite services. We look forward to long-term friendly cooperation with friends from various countries! Welcome to our store!
Q1: What about after sales service, such as installation and commissioning?
Answer:(1)English manual, drawings are supplied with boiler.
(2)Engineers are able to instruct installing and commissioning abroad.
Q2: What are the main products?
Answer:(1)Oil fired steam boiler, capacity from 0.1t-20t
(2) Gas fired steam boiler, capacity from 0.1-20t
(3) Electric steam generator, capacity from 36kw-28800kw
Q3: How to insure your product quality?
Answer:(1)Strength calculation report with applied materials information;
(2)100%NDT(non-destructive inspection) report of steel plate, tube and welding rod;
(3)100% X-ray inspection(welding seam): ensure the quality of entire boiler;
(4)Hydrostatic test: ensure the standard working pressure and safety;
(5)Third-party inspection report;
(6)Passed ISO, ASME certifications
Answer:(1)English manual, drawings are supplied with boiler.
(2)Engineers are able to instruct installing and commissioning abroad.
Q2: What are the main products?
Answer:(1)Oil fired steam boiler, capacity from 0.1t-20t
(2) Gas fired steam boiler, capacity from 0.1-20t
(3) Electric steam generator, capacity from 36kw-28800kw
Q3: How to insure your product quality?
Answer:(1)Strength calculation report with applied materials information;
(2)100%NDT(non-destructive inspection) report of steel plate, tube and welding rod;
(3)100% X-ray inspection(welding seam): ensure the quality of entire boiler;
(4)Hydrostatic test: ensure the standard working pressure and safety;
(5)Third-party inspection report;
(6)Passed ISO, ASME certifications
