Audited Supplier
70~95A
PU
Transparent
PEPSON
Plastic Bag
According to Customer Requirement
China
39269090
Product Description
Specifications:
TPU granules, hardness, including: 80A/85A/90A/95A.
Features:
Normally including two categories: Polyester and polyether.
Hardness Shore 60A-72D.
Performance:
FDA certification;
Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modulus of elasticity;
Good resistance to oil, hydrolysis, anti-UV (ozone), small swelling in non polarity solvent and fuel;
Good weather resistance (low temperature flexibility), without plasticizer; It can be dyed with good air permeability and moisture permeability;
TPU thermoplastic elastomers, high tension, high tensile, tough wear-resistant characteristics of aging, as strong of fiber products.
Processing methods:
Suitable for injection molding, blow molding and extrusion molding and other processing methods.
Application:
For all types of products such as shoes, industrial casters, hose, cable sheathing, film, advanced accessories, medical equipment and sports equipment.
Physical Properties | Testing method | unit | E480A | E485A | E490A | E495A | E498A | E464D | E472D |
Specific Gravity | 1.21 ± 0.02 | 1.22 ± 0.02 | 1.22 ± 0.02 | 1.22 ± 0.02 | 1.23 ± 0.02 | 1.24 ± 0.02 | 1.25 ± 0.02 | ||
Hardness | ShoreA ShoreD | 80 ± 3 | 85 ± 3 | 90 ± 3 | 95 ± 3 | 55 ± 3 | 64 ± 3 | 72 ± 3 | |
100!%Modulus | Kg/cm2 | 50 | 70 | 90 | 110 | 150 | 180 | 220 | |
Tensiles Strength | Kg/cm2 | 350 | 380 | 400 | 450 | 450 | 500 | 550 | |
Elongation at break | 0/0 | 500 | 450 | 450 | 420 | 400 | 350 | 320 | |
Tear Strength | Kg/cm2 | 85 | 95 | 105 | 125 | 150 | 180 | 200 | |
| 70 degree permanence Compression Set | 0/0 | 32 | 35 | 38 | 40 | 45 | |||
Abrasion Loss | Mg | 30 | 32 | 35 | 40 | 50 | 60 | 60 | |
| Polyol | Polyester ( Normal Polyester ) Anti-Temperature : -30 degree -80 degree | ||||||||
| Testing Condition Pull Strength Testing: extruding and forming 2mm trial sheet, after 100degree *16 heating and then testing. Abrasion: Tober abrasion Wheel H-22, Weight 1kgs, Turning 1000 Circles *Above data just for Reference. | |||||||||
