Audited Supplier
BP-8177-BT
Lifetime Maintenance
1 Year
Pipe,Sheet,Profile,Filament,Piston,etc.
PVC,PE, PP,ABS,WPC,Polystyrene,EPE,XPS,etc.
Extrusion
One Feed
Integral Type Extruder
Twin-Screw
Full Intermeshing
Deep Screw
Exhaust
Automatic
Computerized
BAOPIN
Polywood Wooden Case
1250*450*820(W*D*H)mm
China
8477201000
Product Description
Table-top twin-screw extruder/PLC type
This mini twin screw extruder is equipped with LED digital indicator, and high precise temperature and pressure sensors detect the nose temperature and pressure. Can be used in laboratory test, small-scale production, etc.
The mini twin screw extruder is suitable for small batch material mixing, plasticizing and dispersing, is featured by plasticizing homogeneity, color proofing and filling modification.
Parameters:
Specification:
1.Screw material: Made of 40CrNiMo special tool steel with the screw consisting of the feeding section, conveying section, compression region and mixing head.
2.Heating zone: Charging barrel area has 4 aluminum heater, 2 heaters in the handpiece and the outside covered by safety fan cowl.
3.Cooling facility: Multi-wings fan force cooling in super quiescent condition.
4.Driving system: Precision gear reduction motor and deceleration rotation distribution integration.
5.Feeding mouth: 0 - 50 RPM frequency control of motor speed screw force feeding.
This mini twin screw extruder is equipped with LED digital indicator, and high precise temperature and pressure sensors detect the nose temperature and pressure. Can be used in laboratory test, small-scale production, etc.
The mini twin screw extruder is suitable for small batch material mixing, plasticizing and dispersing, is featured by plasticizing homogeneity, color proofing and filling modification.
Parameters:
| Output | According to the raw material process formula |
| Temperature range | ~300ºC |
| Screw diameter | 20mm |
| Length diameter ratio | 1:25 |
| Screw direction | Rodent type, parallel and same direction rotation |
| Screw speed | 0-300 rpm frequency control |
| Screw material | The mandrel is made of 40CrNiMoA chromium-molybdenum alloy tool steel, and the threaded components are made of W6Mo5CR4V2 wear-resistant alloy steel, with a hardness of HRC60, with conveying blocks, mixing blocks, shearing blocks, banburying blocks, kneading blocks, countercurrent blocks, building block series components, and the mandrel is gradually splined and can be combined according to any material ratio to meet the needs of different extrusion processes |
| Combination method | The combination mode of the screw suite is building block spiral and the machine barrel is multi-section type, with self-cleaning function |
| Heating region | Charging barrel area has 3 aluminum heaters, 1 heater in the handpiece and the outside covered by safety fan cowl |
| Cooling system | 3 groups of multi wing fans with super static forced air cooling |
| Power supply | 3∮,AC380V, 50Hz three-phase and five-line |
| Electric control system | PLC programmable color touch screen, human-machine interface operation, dynamically display of extrusion process, including temperature control, drive, speed, pressure, and interlocking control functions |
Specification:
1.Screw material: Made of 40CrNiMo special tool steel with the screw consisting of the feeding section, conveying section, compression region and mixing head.
2.Heating zone: Charging barrel area has 4 aluminum heater, 2 heaters in the handpiece and the outside covered by safety fan cowl.
3.Cooling facility: Multi-wings fan force cooling in super quiescent condition.
4.Driving system: Precision gear reduction motor and deceleration rotation distribution integration.
5.Feeding mouth: 0 - 50 RPM frequency control of motor speed screw force feeding.
