Audited Supplier
Td21093 Hydroextractor Dry Centrifugal Machine Drying Machine for Electroplating Product
Drying Machine :
Principle
Adopts the principle of centrifugal drying and uses a motor to rotate through a belt, which drives the drum to rotate at a high speed of 800-1000 rpm to spin off most of the water and oil. When the parts are dried, the foot brake can still be used. The device quickly stops the rotation of the drum to improve production efficiency.
Installation
Choose a good place (as far as possible, place it in a ventilated and dry place), level the machine, fix the anchor bolts, and turn on the power for a no-load test machine for 30 minutes (turn the barrel clockwise) to check the rotation Direction and working condition of each component. The whole machine has a voltage of 380V, which is wired by an electrician, 3 live wires, and the two-color wires are ground wires.
Use
When using this dryer, your company must first install a leakage switch and check whether all parts and electrical components are damaged and leaked due to transportation, and whether the machine is running flexibly. , Dry place), level the machine, fix the foot bolts, and turn on the power for an unloaded test machine for 30 minutes to check the rotation direction of the drum and the working conditions of each component. When everything is normal, it can be delivered. The loading and unloading of the workpiece should be stopped, and care should be taken not to overload the drum and be subjected to violent impact. After the parts are installed, they must be covered before starting the motor to ensure safe production. The main power must be disconnected after work to avoid accidents.
Package & Delivery:
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A:it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
