Audited Supplier
RP-M1200-C2-PH60-R101-S0-CN
Magnetostrictive Displacement Sensor
Start/Stop Output
Linear Displacement
SemiConductor Integrated
Metal
Controller Dependent (Minimum Accuracy 5μm)
IP67
CE
Customized
25~5500 mm
Start/Stop Signal (Start/End)
Controller Dependent (Minimum Accuracy 5μm)
<±0.01% of Full Scale
<±0.001% of Full Scale,
<10μm
<15ppm/ºC
Arbitrary
IP67rh Stainless Steel Rod
-40ºC ~ +85ºC
35MPa (Continuous)/70MPa (Peak)
+24VDC±20%
<80mA (Varying with Range)
Max.-30VDC
Max.36VDC
TEC Sensors
Paper Tube
China
90318090
Product Description
| Output: | Start/Stop Output |
| Measuring length: | 25-5500 |
| Repeat accuracy: | <+0.001% of full scale, min ±1μm |
| Non-linearity: | <+0.01% of full scale, min ±50 μm |
| Operating voltage Ub: | +24Vdc ± 20% |
| Ambient temperature: | -40°C ~+85°C |
| Mechanical configuration: | Fastening M20 threads, Fastening M18 threads, Fastening 3/4" threads |
| Housing material: | Aluminum alloy |
| IP rating: | IP67 |
| Approval/Conformity: | CE |
TEC magnetostrictive displacement sensor is a new generation of linear displacement sensor independently developed by Zheda Jingyi. It can provide users with real-time, reliable, accurate and continuous linear displacement signals under harsh working environment,and is widely used in metallurgical equipment, wind power equipment, construction machinery, rubber machinery, port machinery,energy and other industrial automation fields.
The sensor outputs the controller start signal and the position magnet signal, and the time interval between them is proportional to the displacement of the position magnet. The measurement and control of time is calculated by the controller and converted into displacement value.
RP Series aluminum profile provides flexible and simple external installation mode, which is suitable for stroke or position detection of linear motion mechanism, and can also be used for external position detection of hydraulic cylinder.
