Audited Supplier
RH-M0550-S1-PD56-N10-S0-CN
Magnetostrictive Displacement Sensor
Start/Stop Output
Linear Displacement
SemiConductor Integrated
Metal
Controller Dependent (Minimum Accuracy 5μm)
IP67
CE
Customized
25~5500 mm
Analog Current or Voltage
1 / 5 / 10 / 20 / 50 / 100 μm
<±0.01% of Full Scale
<±0.001% of Full Scale
<10μm
<15ppm/ºC
Arbitrary
IP67rh Stainless Steel Rod
-40ºC ~ +85ºC
35MPa (Continuous)/70MPa (Peak)
+24VDC±20%
<80mA (Varying with Range)
Max.-30VDC
Max.36VDC
TEC Sensors
Paper Tube
China
90318090
Product Description
| Output: | ProfiNet output |
| Measuring length: | 25-5500 mm |
| Repeat accuracy: | <+0.001% of full scale, min ±1μm |
| Non-linearity: | <+0.01% of full scale, min ±50 μm |
| Operating voltage Ub: | +24Vdc ± 20% |
| Ambient temperature: | -40°C ~+85°C |
| Mechanical configuration: | Fastening M20 threads, Fastening M18 threads, Fastening 3/4" threads |
| Housing material: | Aluminum alloy |
| IP rating: | IP67 |
| Approval/Conformity: | CE |
TEC magnetostrictive displacement sensor is a new generation of linear displacement sensor independently developed by Zheda
Jingyi. It can provide users with real-time, reliable, accurate and continuous linear displacement signals under harsh working environment,
and is widely used in metallurgical equipment, wind power equipment, construction machinery, rubber machinery, port machinery,
energy and other industrial automation fields.
RH series pressure-resistant rodshell, built-in installation design for hydraulic system, pressure-resistant 35MPa continuous, flexible and simple installation mode, mounting thread form M18×1.5 or M20×1.5 or 3/4"-16UNF-3A.
Note: The measurement Non-usable area shown in the figure indicates that the output value of the sensor in this area is zero or unreliable. The values of the head and end Non-usable areas of this product are 50.8 m and 63.5 m respectively. The value of the measurement Non-usable area can be appropriately modified according to the needs of customers, please pointed out when ordering.
