Main Technical Specifications
| temperature/humidity/vibration Multi-Functional Integrated Testing Chamber | |||
| Specifications | |||
| THV- | |||
| 408 | 1000 | ||
| Working chamber volume ( L ) | 408 | 1000 | |
| Interior size ( W*H*D ) mm | 600*850*800 | 1000*1000*1000 | |
| Safety device | No fuse breaker, over pressure over heat and over current protection for compressor, | ||
| Over temp. protection, over load protection for blower, | |||
| Hydraulic and Water lack Protection dry heat protection | |||
| Power | AC 380V/50Hz ,3phase 5 wires+ Ground wire | ||
| Temp regulating mode | Balanced Temperature & Humidity Control System ( BTC ) | ||
| Ambient temp | +5 ºC~ +35 ºC | ||
| Performance | Temp range | -70 ºC~ +150 ºC | |
| Temp constancy | ≤0.5 ºC | ||
| Temp uniformity | ±2.0 ºC | ||
| Humidity constancy | ±2.5%RH | ||
| Humidity range | 2.0%RH ~ 98%RH | ||
| Humidity uniformity | If humidity≤75%RHJ, ±3.0%RH ; f humidity > 75%RHJ, ±5.0%RH | ||
| Cooling rate | ≤5 ºC /Min or ≤10 ºC /Min ( -55 ºC~ +80 ºC within humidity range ) | ||
| Material | Exterior material | Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel plate | |
| Interior material | Stainless steel plate(SUS 304) | ||
| Insulation material | Rigid polyurethane foam | ||
| Cooling system | compressor | Semi-Hermetic Compressor | |
| Cooling mode | Water cooled | ||
| Heater | Iron-chrome wire heater | ||
| Blower | Centrifugal Blower | ||
| Sight window | 470mm*350mm Glass incorporating heat generator | ||
| Temp sensor | Pt-100 | ||
| Controller | Touch screen controller | ||
| Shaking table | Custom made as required | ||
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||
Photos show










Audited Supplier










