The Width of Pet Non-Silicon Release Film with High Transparency and Cleanliness Can Be Customized

Product model
RN517T --- stands for "50u transparent PET non-silicon release film (600~900g/in)."
Product composition
This release film is made of transparent PET (polyester film) as the base material and coated with non-silicon release material on one side.
Transparent non-silicon release film
Product characteristics
1. The value of overweight stripping is stable;
2. No silicon transfer, high residual adhesion;
3. The coating shall be uniform without obvious coating marks;
Product specification
1. Width: 1070mm (can be customized according to customer requirements)
2. Length: 200-4000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
This transparent PET non-silicon release film is suitable for making the bottom film of PET hot bending film

Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement

instructions
1. In order to obtain the best use effect, it is recommended to use this product within 6 months from the purchase date;
2. It must be retested before use after expiration;
3. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
4. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed