Audited Supplier
Blast Furnace, Cement Kiln, Ceramic Kiln, Chemical Kiln, Glass Kiln, Steel-Making Furnace
Alumina Block
1580< Refractoriness< 1770
Extrusion Method
0.6-1.25
0.17-0.51
1.0-10MPa
vuulcan
Sea-Worthy Wooden Case
customized
China
Product Description
Thermal insulation clay brick product description
The bulk weight of light insulation brick is 0.60 ~1.25g/cm3. Operating temperature range is 900 ºC to 1600ºC. Each grade is uniquely designed to meet different thermal, physical and chemical requirements. Lightweight insulation bricks are made of high-quality ultra-pure raw materials and are strictly classified according to their grade of filling. Each face of the brick is machined and ground to the exact size required. The material profited by reducing fuel costs, construction costs, and time spent in high-temperature furnaces.
Characteristics of thermal insulation clay bricks
Low thermal conductivity
Low bulk density
Light weight
Low creep rate at high temperature
Good thermal shock resistance and high temperature resistance
Good performance, high refractoriness
Application of thermal insulation clay brick
Other refractory materials hot surface refractory lining or backing insulation layer. Refractory lining or heat insulation materials for industrial furnaces in petroleum and chemical industry, such as ethylene cracking furnaces, tube furnaces, synthetic ammonia reforming furnaces, gas producer furnaces, high-temperature shuttle furnaces, etc.
Alumina content ranges from 40% to 80%
Widely used in metallurgical industry
| Brand roperties | B-1 | B-2 | B-3 | B-4 | B-5 | B-6 | B-7 | C-1 | C-2 | C-3 |
| ≤ 2.0% Reheating Shrinkage Temp (ºC) | 900 | 1,000 | 1,100 | 1,200 | 1,300 | 1,400 | 1,500 | 1,300 | 1,400 | 1,500 |
| Bulk Density (g/cm3) | 0.70≥ | 0.70≥ | 0.75≥ | 0.80≥ | 0.80≥ | 0.90≥ | 1.00≥ | 1.10≥ | 1.20≥ | 1.25≥ |
| (kg/cm2) Cold Crushing Strength | 25≤ | 25≤ | 25≤ | 25≤ | 25≤ | 30≤ | 30≤ | 50≤ | 70≤ | 100≤ |
| (W/m.k) at 350ºC Thermal conductivity | 0.17≥ | 0.18≥ | 0.20≥ | 0.22≥ | 0.23≥ | 0.27≥ | 0.31≥ | 0.30≥ | 0.38≥ | 0.45≥ |
| Main Applications | Ceramic Roller kiln reheating Reheating Furnace Blast Furnace Petrochemical Furnace General Industrial Furnace etc. | |||||||||
| Brand Properties | JM-23 | JM -26 | JM -28 | JM -30 | JM -32 | |
| Classification temperature (ºC) | 1300 | 1400 | 1500 | 1550 | 1600 | |
| Bulk Density (g/cm3) | 0.6 | 0.8 | 0.9 | 1.0 | 1.1 | |
| Cold Crushing Strength (MPa) | 1.2 | 1.8 | 2.5 | 3.3 | 3.5 | |
| Modulus of rupture (MPa) | 1.0 | 1.7 | 2.3 | 3.1 | 3.2 | |
| (CTºCX24h) Permanent Linear Change (%) | 0.6 | 0.6 | 0.8 | 0.9 | 1.01 | |
| @ 1,100ºC Thermal Linear Expansion(%) | 0.50 | 0.52 | 0.52 | 0.53 | 0.7 | |
| Thermal conductivity (W/m.k) | 350ºC | 0.18 | 0.27 | 0.32 | 0.38 | 0.49 |
| 400ºC | 0.20 | 0.29 | 0.34 | 0.40 | 0.5 | |
| 600ºC | 0.24 | 0.32 | 0.36 | 0.42 | 0.51 | |
| (%) Chemical Analysis | Al2O3 | 40 | 56 | 67 | 73 | 77 |
| Fe2O3 | 1.0 | 0.8 | 0.7 | 0.7 | 0.5 | |
| Main Applications | Ceramic Roller kiln reheating Reheating Furnace Blast Furnace Petrochemical Furnace General Industrial Furnace etc. | |||||
