Audited Supplier
PM-V83DV1
1 Year
Plasma Surface Processor
Cleaning and Activating Material Surface
Plastic, Metal and Glass
3-18 mm
1000W*3
Fari
1 Set
FARI
Wooden Case
680*400*1300 mm
China
Product Description
Product Description
Product Features
Number of matched nozzle: three nozzles
It supports convenient power adjustment on the panel
Optional nozzles with different specifications make it suitable for different products
The device is effeicient,energy-saving and environment friendly
The device supports online use or automatic control.
Principle of plasma surface treatment technology
The energy of particles in the plasma is generally about several to a dozen of electron volts, which is greater than the bonding energy of the polymer material (several to a dozen of electron volts), and can completely break the chemical bonds of organic macromolecules to form new bonds; however, it is much lower than that of the high-energy radioactive rays and only involves the material surface, leaving no influence to the performance of the matrix. Through the low temperature plasma surface treatment, a variety of physical and chemical changes occur on the surface of the material, making the surface rough due to etching, with dense cross-linking layers or incorporated with oxygen-containing polar groups, so that the hydrophilia, adhesion, dyeability, biocompatibility and electrical properties can be improved. The surface morphology of the material can be significantly changed and a variety of oxygen-containing polar groups can be introduced by treating the material under appropriate technological conditions, making the surface changed from non-polar to polar, hardly adhesive to highly adhesive and hydrophilic, which is conducive to bonding, coating and printing. Applying the high frequency AC voltage at both ends of the electrode causes the air between two electrodes to produce glow discharge, which results in the plasma. The electrons constantly collide with gas molecules in the movement, generating a large number of new electrons. When these electrons reach the anode, they will accumulate on the surface of the medium and then modify the surface.
Product Specification
Product Application
Plasma treatment machine can applied in material surface cleaning and activation treatment in respect of printing and packaging,mobile and computer digital,silicone rubber, plastic product,metal products,precision glass,wires and cables,electronics,automobile,medical biology,textile goods and composite materials,which play a key role in subsequent adhesion,printing,code spraying,spraying,gluing and welding process
Our Exhibition Show
Exhibition-CHTF :
We have attended the China High-Tech -Fair(CHTF);Our products are appreciated and praised by many overseas buyers at the
exhibition. Many customers have established good cooperative relationship with us. We also welcome more overseas friends to consult us!
Customer comes first, Quality comes first, Value comes first!
FAQ
Q1: Are you trading company or manufacturer ?
A: We are manufacturer,which has established 11 years
Q2.How many years is the warranty
A: Item has one year warranty , if any spare part were broken , we can sent the new spare part for
you in free , but you need pay the freight by yourself
Q3: How long is your delivery time?
A: Generally it is 3-5 days after receiving the order and full payment if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to order quantity.
Q4:Do you have CE certification?
A: Yes, we guarantee the quality, if you need the CE certification, we can sent it to you
Q5: What is your terms of payment ?
A: 100% full payment of T/T, Trade Assurance, Western Union .
Q6: Whether the sprayed plasma is harmful to human body?
A: Please don't worry, plasma is non-toxic and won't be harm to human body .
Number of matched nozzle: three nozzles
It supports convenient power adjustment on the panel
Optional nozzles with different specifications make it suitable for different products
The device is effeicient,energy-saving and environment friendly
The device supports online use or automatic control.
Principle of plasma surface treatment technology
The energy of particles in the plasma is generally about several to a dozen of electron volts, which is greater than the bonding energy of the polymer material (several to a dozen of electron volts), and can completely break the chemical bonds of organic macromolecules to form new bonds; however, it is much lower than that of the high-energy radioactive rays and only involves the material surface, leaving no influence to the performance of the matrix. Through the low temperature plasma surface treatment, a variety of physical and chemical changes occur on the surface of the material, making the surface rough due to etching, with dense cross-linking layers or incorporated with oxygen-containing polar groups, so that the hydrophilia, adhesion, dyeability, biocompatibility and electrical properties can be improved. The surface morphology of the material can be significantly changed and a variety of oxygen-containing polar groups can be introduced by treating the material under appropriate technological conditions, making the surface changed from non-polar to polar, hardly adhesive to highly adhesive and hydrophilic, which is conducive to bonding, coating and printing. Applying the high frequency AC voltage at both ends of the electrode causes the air between two electrodes to produce glow discharge, which results in the plasma. The electrons constantly collide with gas molecules in the movement, generating a large number of new electrons. When these electrons reach the anode, they will accumulate on the surface of the medium and then modify the surface.
Product Specification
| Input Voltage | AC220(±10V) |
| Output Power | 1000 W*3 |
| Size | 680*400*1300 mm |
| Frequency | 18-25 kHz |
| Air Pressure | 2-2.5 bar |
| Weight | 90 kg |
| Treatment Width | 3-5 mm, 7-13mm, 15-18mm (optional) |
| Gas Used | Air,N2 (optional) |
| Cable Length | 3 m |
Product Application
Plasma treatment machine can applied in material surface cleaning and activation treatment in respect of printing and packaging,mobile and computer digital,silicone rubber, plastic product,metal products,precision glass,wires and cables,electronics,automobile,medical biology,textile goods and composite materials,which play a key role in subsequent adhesion,printing,code spraying,spraying,gluing and welding process
Our Exhibition Show
Exhibition-CHTF :
We have attended the China High-Tech -Fair(CHTF);Our products are appreciated and praised by many overseas buyers at the
exhibition. Many customers have established good cooperative relationship with us. We also welcome more overseas friends to consult us!
Customer comes first, Quality comes first, Value comes first!
FAQ
Q1: Are you trading company or manufacturer ?
A: We are manufacturer,which has established 11 years
Q2.How many years is the warranty
A: Item has one year warranty , if any spare part were broken , we can sent the new spare part for
you in free , but you need pay the freight by yourself
Q3: How long is your delivery time?
A: Generally it is 3-5 days after receiving the order and full payment if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to order quantity.
Q4:Do you have CE certification?
A: Yes, we guarantee the quality, if you need the CE certification, we can sent it to you
Q5: What is your terms of payment ?
A: 100% full payment of T/T, Trade Assurance, Western Union .
Q6: Whether the sprayed plasma is harmful to human body?
A: Please don't worry, plasma is non-toxic and won't be harm to human body .
