Audited Supplier
This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding,indexing and wire cutting, only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer's armature accordingly.
(1) Application
The motor armture winding machine is suitable for home appliance, car and power tool motor aramture
(2)Specification
| Wire OD | Armature OD | Stack length | Shaft OD |
| 0.07-1.3mm (<0.5 electronic tensioner; >0.5 hysteresis tensioner | 22-80 mm | 20-100 mm | 3-15 mm |
| Voltage | Power | ||
| three phase AC380V±10%, 50/60 Hz | Indexing:750W | Left flyer:1KW | Right flyer:1KW |
(3)Main composition
| PLC | Indexing and winding motor | Railway | HMI | Pneumatic | Frame |
| Mitsubishi | Mitsubishi | HIWIN | Mitsubishi | AIRTAC | Aluminum alloy |
(4)Spare parts with machine delivery
| Flyer belt | Flyer motor belt | Indexing motor belt | Wire roller | Electro optical switch | clamp |
| 4pcs | 2pcs | 1pc | 4pcs | 2pcs | 1pc |
(5)Inserted type Sleeves in 3 part as following machine
Provided the armature is with riser collector rather than with hook commutator, you can run WD-2B-TAW
