Audited Supplier
HGF
Industrial
Three-Phase
Driving
Closed Type
2/4/6/8
ISO9001, CCC, CE
Weg
B/F
S1
-15ºC≤0≤40ºC
IP65/IP66
WEG
Packing in Wooden Cases and Carton Cases
630*310*410 cm
China Weg
8501520000
Product Description
1.Introduction
HGF series motors are compact and simple in structure and stable in performance. They are widely used in various occasions such as industrial manufacturing and processing.
Frame is equipped with external heat sinks to maximize heat dissipation and extend the service life of the motor.
HGF series motors are designed according to the IEC 60034-1 standard.
The mechanical design is based on the IEC 60072 standard.
The cooling system is composed of an inner fan and an outer fan to ensure that the heat inside the motor is evenly distributed, so that the motor has good performance.
HGF series motors are asynchronous squirrel cage motors. The rotor material is aluminum or copper (HGF API 541). The frame number is from IEC 315C/D/E to 630. The voltage can be from low voltage to medium voltage 6.6kV. The high voltage can range from above 6.6kV to 11kV.
HGF series motors are flexible in design to meet variable torque and constant torque load requirements, and are suitable for different user needs, such as fans, pumps, mills, compressors, etc.
HGF series motors can be operated at -20°C to +40°C. At the same time, WEG can also design and provide HGF series motors according to customers' special environmental temperature requirements.
2.Classification
HGF series motors are named according to the following rules:
IEC: Motors with frame size 400 have two length casings, each casing has 3 sets of foot holes, respectively:
HGF 400L/A/B and HGF 400C/D/E
The length of the case with frame size 450 and above is unique. Each case has 5 foot holes (L/A/B/C/D) of different lengths. These enclosures are represented as: HGF450, HGF500, HGF560, HGF630
3.Standard HGF
4.Structural details
The information described here is the standard installation method and the most commonly used HGF series models. According to user requirements, special purpose and/or customized motors can also be provided.
5. Structure configuration
