The sensor can transfer the measurement signals of temperature, pressure and liquid level to I2C digital output. With the fast and accurate interface, the sensor is used to build an Internet of Things using a microcontroller. It can read data and control power on and off to reduce power consumption through microprocessor operation.
- Digital compensation for sensor offset, sensitivity, temperature drift and nonlinearity
- 32-bit customer ID field for module traceability
- Digital output of temperature and pressure in I2C bus mode
- Fast power-on to data output response: 3ms
- Low power consumption, sleep mode operation, as low as 5 μ A, current consumption depends on the programmed sampling rate
- Operating temperature: -40°C to + 85°C
- Wide supply voltage capability: 3.3V/5V
Range | -100kPa…0kPa~10kPa…100MPa | Pressure form | Gauge / Absolute |
Power supply | 5±0.1V DC or 3.3±0.1V DC | Accuracy | ±0.5%FS (pressure) ±0.5ºC (temperature) |
Overload | 2 times full pressure scale | Long term stability | ±0.2%FS/year |
Operating temperature | -40ºC~85ºC | Storage temperature | -40ºC~125ºC |
Material
- Diaphragm: stainless steel 316L / titanium TA1
- Shell: stainless steel 316L / titanium TC4
- Pressure lead-in tube: stainless steel 316L
- Pin lead: gilded Kovar
- Sealing ring: NBR
Connection
VCC | SCL | SDA | GND |
red | yellow | blue | black |
Data measurement acquisition operation



Parameters | Typ | Unit |
Zero pressure output (5%) | 333 | hex |
Zero pressure output (10%) | 666 | hex |
Full-scale pressure output (90%) | 399A | hex |
Full-scale pressure output (95%) | 3CCB | hex |
Structure
Range | Outline drawing |
-100kPa~10MPa | ![]() |
25MPa~100MPa | ![]() |


