Tissue floatation and Baking Processor CR-230A

Features:

· Independentpartition,thermostat controls the temperature of the floatation area and thebaking area.Accurate temperature control,the accuracy can reach±2ºC,uniform heating;

· Noncontactinfrared temperature measuring device is adopted in the floatation area.Whenchanging water to clean, there is no need to manually reverse the temperaturemeasuring head;

·Can beon/off.The light in the floatation bath can be adjusted in multiple stages toget a better view and meet the needs of different technicians;

·Thebooth container is transparent, high temperature resistant and high lighttransmittance.It's easy to change water and clean because of the handles onboth sides;

·Thebaking area is designed to prevent side-slip,to avoid slide risk.Bake up to 30slides.And has the function of pre-baked (drain) and direct baked (stickbaked);

· It'sergonomically designed instrument with compact body and optional vertical andhorizontal baking table.Long time operation is not easy to fatigue;

· Multipleoverheat protection to avoid dry burning,safe and reliable;

·Automaticmemory function when power off.Automatically restore the last temperaturecontrol settings as turn it back on;

· Specialblack scratch resistant coating.Floatation is easy to observe.Baking area wearresistant,non-stick and easy to clean.

Technical specification:

·Rated voltage: 220V  

·Rated frequency: 50/60Hz  

·Rated power: 500W  

·Master fuse:10A

·Dimensions:443(L)*300(W)*131(H)mm

·Floatation bath:270(L)*178(W)*60(H)mm

·Baking table:30 slides

·N.W.:5.6kg

·Relative humidity:20-80%,No condensation

·Working environment temperature range:0ºC~+40ºC

·Floatation temperature control range:Indoor temperature ~75ºC

Jinhua Craftek Instrument Co., Ltd. is dedicated to developing and manufacturing high-end pathological microtomes and their accessories. It is located in Jinhua National High and New Technology Industrial Development Zone,Zhejiang Province,China, which includes the perfect industrial chain and many  medical instrument manufacturers in it.

Our company's R&D team developed the first semi-automatic microtome in China in the early 2000s. Most parts of the instrument are machined with 4-axis NC machining center. Our company was ISO 9001 certified and strictly follows government policies supervising medical instrument manufacturers.
Our worldwide maintenance and service centers will be established in the near future.
High-standards of craftsmanship & innovative technology defines who we are,Craftek.
We would like to emphasize again that we develop and manufacture HIGH-END microtomes.