Audited Supplier
The titanium carbide cermet rod(TiC rod) belongs to the steel-bonded cemented carbide, which is a kind of compound material based on the steel as the binder phase and used the refractory metal carbide(mainly the titanium carbide and the tungsten carbide) as the hard phase. The TiC rod is the high-hardness and high-strength titanium-based alloy composite material.
- Cost - effectiveness Advantage:The primary raw material, TiC powder, is self - produced by our company. With uncompromised quality and punctual delivery, our production cost is conspicuously more competitive than that of our counterparts in the industry.
- Abundant Experience:The technical personnel responsible for the manufacturing process boast 20 years of rich production experience. Our products have been extensively exported to countries like Germany, Italy, and the United States.
- Stable Quality Assurance:Following the heat - treatment process in casting, the cracking ratio of our products is maintained at a remarkably low level of 0.3‰.
- Expeditious Delivery:Our monthly production capacity reaches 50 tons. Under normal circumstances, customized products can be shipped within 15 days
| Diameter(mm) | Length(mm) | unit weight(g) |
| 12 | 40 | 27.6 |
| 12 | 50 | 34.5 |
| 12 | 60 | 41.4 |
| 14 | 40 | 37.5 |
| 14 | 50 | 46.9 |
| 14 | 60 | 56.3 |
| 14 | 80 | 75.1 |
| 14 | 90 | 84.5 |
| 16 | 30 | 36.8 |
| 16 | 40 | 49.0 |
| 16 | 50 | 61.3 |
| 16 | 60 | 73.6 |
| 16 | 70 | 85.8 |
| 16 | 80 | 98.1 |
| 16 | 90 | 110.3 |
| 18 | 60 | 93.1 |
| 18 | 80 | 124.1 |
| 20 | 30 | 57.5 |
| 20 | 40 | 76.6 |
| 20 | 50 | 95.8 |
| 20 | 60 | 114.9 |
| 20 | 70 | 134.1 |
| 20 | 80 | 153.2 |
| 20 | 90 | 172.4 |
| 20 | 100 | 191.5 |
| 20 | 110 | 210.7 |
| 20 | 120 | 229.8 |
| 20 | 135 | 258.6 |
Customization can be done based on customers' specific requirements. | ||
| Grade | Density (g/cm3) | Hardness | TRS(MPa) | Porosity | Abrasion test | Elastic modulus(×10²kg/cm²) | Specific resistivity Ωmm²/M | Coercive force(HC) | Thermal expansion Coefficient ×10-6/ °c | ||||
| Anneal(HRC) | Hardenin(HRA) | Anneal | Hardenin | Anneal | Hardenin | °c | a | ||||||
| GT35 | ≥6.4 | ≤48 | ≥85 | ≥1350 | A04B00 | - | 306 | 298 | 0.812 | 0.637 | 68 | 20-200 | 8.43 |
| 20-700 | 11.83 | ||||||||||||
| R5 | ≥6.3 | ≤48 | ≥85 | ≥1100 | A04B00 | - | 321 | 313 | 0.784 | 0.269 | 90 | 20-200 | 8.43 |
| 20-700 | 11.83 | ||||||||||||
| TM52 | ≥6.0 | HRC≥60 | ≥1500 | A04B00 | 7.2 | 353 | - | - | - | 20-200 | 9.16 | ||
| 20-700 | 11.13 | ||||||||||||
| TM60 | ≥6.20 | HRC≥56 | ≥1350 | A04B00 | - | - | - | - | 20-200 | 11.75 | |||
| 20-700 | 15.30 | ||||||||||||
| GW1 | ≥10.2 | ≤48 | ≥83 | ≥1500 | A04B00 | - | - | ||||||
Zhuzhou Bullo Cemented Carbide Co.,Ltd is a modern enterprise integrating independent production and trade, and our expertise in the tungsten carbide components began in 2008.The company is located in Zhuzhou City, Hunan Province,and has passed the ISO9001:2015 quality certification system. It owns standardized modern factory, a professional technical and sales team, as well as advanced equipment for production and inspection.
We have many specific tungsten carbide products which cover a wide range of industries,they are mainly divided into two major parts: cemented carbide wear-resistant parts and cemented carbide cutting tools. Part of our tungsten carbide products are listed in detail as follows:
· Tungsten carbide rods, strips, and plates
· Tungsten carbide mechanical seal rings
· Tungsten carbide pin pegs and blocks
· Tungsten carbide grinding jar, balls, jaw plates, and grinding discs
· Crusher and pulverizer blades
· Tungsten carbide nozzles for oil and gas
· Tungsten carbide rotors and stators
· Control valve assemblies and flow trim components
· Valve plugs, valve seats, and valve cages
· Wear-resistant bushings and liners
· Bearings, bushings, guide rails, and sleeves
· Tungsten carbide welding blades
· Tungsten carbide hob rotary cutters and fixed blades
· Tungsten carbide circular saw blades
· Tungsten carbide rotary files
· Tungsten carbide inserts and end mills
· Tungsten carbide rollers
· Tungsten carbide auxiliary powder materials
...
Our products have been widely exported to Russian Federation, Germany, America, South America, etc. And our carbide are widely used for machining cast iron, steel, stainless steel, aluminum, copper, rubber and so on.
Stable quality and satisfactory service are the eternal commitments of Zhuzhou Bullo Cemented Carbide Co., Ltd. We adheres to the philosophy of "high quality, integrity, and innovation" and is dedicated to providing high-quality products and services to all our customers. We warmly welcome interested customers to come and customize their orders and cooperate with us!
