Audited Supplier
FA-2000
Stretch Blow Molding Machine
PE
Stretch Blow
Automatic
Computerized
CE, ISO9001:2008
Fully Automatic
up to 2000ml
300mm
100mm
45mm
2
120mm
400mm
40-70mm
24 Kw
TONVA
Film Packing
2600kg
China
84773010
Product Description
1. Overview of machine FA-2000-2
Basic specification
Working condition
2.Technical parameter
NOTE :
TONVA company not only manufacture blow molding machine and molds, TONVA would like to provide complete solutions or consultancy for our customers on their products, in order to increase the efficiency and decrease the cost.
If you have any doubts about our machines and molds, please do not hesitate to communicate with TONVA company, your ideas and suggestion will be highly appreciated.
3. Our Company
When it comes to innovative and full range of blow molding machines and molds, you need focus on no further than our TONVA machine in China, which established since 1993. TONVA 's pioneering technologies , rich experience of our strong R&D team, and good service have allowed us to be one of the leaders of this plastic industrial for over 25years.
Our clients in a wide range of plastic industry sectors, such as: daily using, toy, chemical container,agrochemical, pharmaceuticals, automobile, food, traffic using etc, volume range from 3ml to 5000L, single layer to 6layers, single color to three colors,which are all available on TONVA machine production, clients from more than 80 countries, have to come rely on the knowledge and technologies of a brand which stand for both quality and reliability.
4. Contact us
Contact: Hebe Tong
Basic specification
1) PET preform loading automatic
2) Auto-fault detection
3) Bottle neck range: 28-45mm
Working condition
1) Power supply: 380VAC/50HZ (depending on client's country)
2) High pressure: 1.6m3/min, 3.0Mpa
3) Low pressure: 1.0m3/min, 1.0Mpa.
4) Air dryer+ Filter: 2.0m3/min, 3.0Mpa.
2.Technical parameter
| Category | Item | Unit | FA-2000-2 |
| Product Specification | Max volume | ml | 2000 |
| Output | pcs/h | 2000 | |
| Bottle height | mm | 300 | |
| Body diameter | mm | 100 | |
| Neck diameter | mm | 45 | |
| Mold | Cavity NO. | Cavity | 2 |
| Clamping stroke | mm | 120 | |
| Max stretch stroke | mm | 400 | |
| Bottom moving stroke | mm | 40-70 | |
| Power | Total power | KW | 24 |
| Air | HP air compressor | ---- | 1.6/3.0 |
| LP air compressor | ---- | 1.6/1.0 | |
| Air dryer + Filter | ---- | 2.0/3.0 | |
| Air tank | ---- | 0.6/3.0 | |
| Cooling | Water Chiller | P | 3 |
| Machine Specification | Machine(LxWxH) | m | 2.4x1.8x2.0 |
| Machine weight | kg | 2600 | |
| Preform Loader | m | 2x1x2.4 | |
| Loader weight | kg | 2850 |
NOTE :
TONVA company not only manufacture blow molding machine and molds, TONVA would like to provide complete solutions or consultancy for our customers on their products, in order to increase the efficiency and decrease the cost.
If you have any doubts about our machines and molds, please do not hesitate to communicate with TONVA company, your ideas and suggestion will be highly appreciated.
3. Our Company
When it comes to innovative and full range of blow molding machines and molds, you need focus on no further than our TONVA machine in China, which established since 1993. TONVA 's pioneering technologies , rich experience of our strong R&D team, and good service have allowed us to be one of the leaders of this plastic industrial for over 25years.
Our clients in a wide range of plastic industry sectors, such as: daily using, toy, chemical container,agrochemical, pharmaceuticals, automobile, food, traffic using etc, volume range from 3ml to 5000L, single layer to 6layers, single color to three colors,which are all available on TONVA machine production, clients from more than 80 countries, have to come rely on the knowledge and technologies of a brand which stand for both quality and reliability.
4. Contact us
Contact: Hebe Tong
