Audited Supplier
Field Installation and Maintenance
1 Year
Gantry Crane, Bridge Crane, Single Grinder Crane
Electric Hoist
Wire Rope
2~8m/min
>20m
1
CE, ISO9001:2000
New
Green
Include
Include
Pass
Could Supply
Pass
Include
According to Your Demand
Include
Pass
Include
KY(KuangYuan)
Packed by Plywood Crate and Plastic Woven Cloth.
China National standard
Xinxiang, Henan Province
84261930
Product Description
Product features:
- Type CD1, MD1 a kind of small-lifting equipment
- It can be mounted on single beam overhead crane, gantry cranes, jib crane and so on.
- Satisfy normal application
- It is widely used in factories, mines, harbors, warehouses, cargo storage area and shops
- Essentially in raising working efficiency and improving working conditions.
1. Freely provide project designing, process designing, choosing suitable equipment for you.
2. Accompany you to complete the acceptance of the equipment,draft the construction scheme and detailed process, and complete process of export
3. 12 months warranty
4. One year free quick-wear parts
5. Professional technicians provide installation, commissioning services
6. Technical advisory for any time
Accessories:
Wire rope electric hoist is assembled by several parts: hoisting gear box, hoisting motor with brake, rope drum, electric control panel and traveling trolley. All these units are separately accessible and promptly disassembled cost and stopped.
Motor: hoist motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear box: hoist gear box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire rope: hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope drum: grooved hoist drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on ball bearings for ensuring smooth running.
2. Accompany you to complete the acceptance of the equipment,draft the construction scheme and detailed process, and complete process of export
3. 12 months warranty
4. One year free quick-wear parts
5. Professional technicians provide installation, commissioning services
6. Technical advisory for any time
Capacity | 0.25T-50T |
Powder supply | 3P 220-690V,50/60HZ |
Control power | 24V/36V/48V |
Low noise: | 81db |
Speed type: | Single speed or Duel speed |
Chain material: | G80/G100 |
Insulation grade: | F class |
Standard lifting height: | 3m |
Working temperature: | -40ºC - +40ºC |
Accessories:
Wire rope electric hoist is assembled by several parts: hoisting gear box, hoisting motor with brake, rope drum, electric control panel and traveling trolley. All these units are separately accessible and promptly disassembled cost and stopped.
Motor: hoist motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear box: hoist gear box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire rope: hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope drum: grooved hoist drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on ball bearings for ensuring smooth running.
Electric apparatus controlling system: Model CD1 and MD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage)
Packaging:
Packaging:
