Audited Supplier
ST
St1200
Rubber
Steel
Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Strong
4mm-30mm
400mm-2200mm
DIN/Rma/BS/Sans/as
Certificate: ISO 9001/14001/18001
on Line Video Technical Support
Anai
Packed with One Ply Water-Proof PP Fabric
Hebei
4010110000
Product Description
Hebei Anai delivers world-class conveyor belts that are built to withstand the harshest conditions. Our focus is on high performance, low maintenance conveyor belt to ensure we deliver our clients cost effective solutions.
| Fabric Material | Fabric structure | Type | Ply Thickness mm | Tensile Strength (N/mm) | Cover thickness (mm) | Width mm | Length m | ||||||
| Warp | Weft | 2-ply | 3-ply | 4-ply | 5-ply | 6-ply | Top | Bottom | |||||
| EP | Polyester | Poly-amide | EP100 | 0.85 | 200 | 300 | 400 | 500 | 600 | 2-12 | 1-5 | 350~2500 | ≤300 |
| EP125 | 0.9 | 250 | 375 | 500 | 625 | 750 | |||||||
| EP150 | 0.9 | 300 | 450 | 600 | 750 | 900 | |||||||
| EP200 | 1.1 | 400 | 600 | 800 | 1000 | 1200 | |||||||
| EP250 | 1.25 | 500 | 750 | 1000 | 1250 | 1500 | |||||||
| EP300 | 1.45 | 600 | 900 | 1200 | 1500 | 1800 | |||||||
| EP350 | 1.65 | 700 | 1050 | 1400 | 1750 | 2100 | |||||||
| EP400 | 1.75 | 800 | 1200 | 1600 | 2000 | 2400 | |||||||
| EP500 | 2.55 | 1000 | 1500 | 2000 | 2500 | 3000 | |||||||
| Physical properties of rubber cover | |||
| Grade | Tensile Strength/Mpa ≥ | Elongation at break /% ≥ | Abrasion Loss/mm3 ≤ |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
| Notes: Grade H-used for transporting sharp, abrasive materials which can damage belts badly. Grade D-used for transporting highly abrasive materials. Grade L-used for transporting medium-abrasion materials. | |||
| Ply adhesion | |||
| Item | Ply to ply | Rubber cover to ply | |
| Rubber cover thickness ≤1.5mm | Rubber cover thickness >1.5mm | ||
| All samples average value/ (N/mm) ≥ | 4.5 | 3.2 | 3.5 |
| All samples min peak value/ (N/mm) ≥ | 2.9 | 2.4 | 2.9 |
| Note: All samples max peak value is not more than 20N/mm. | |||
