Audited Supplier
RM-440W-182M/108T
Yes
25 Years
108 Pieces
Household and Industrial
New
CE, TUV/Bis/Brazil
Monocrystalline Silicon
Solar Panel
4.Omm&Sup2
N-Topcon
Acceptable
Acceptable
1750*1120*1260mm
Anodized Aluminum Alloy
Energy Conservation System
3.2mm
182*91mm Monocrystalline, 108 Pieces
IP68
White Backplane
Mc4 Compatible Connector
21%-23%,
1500V DC
V-land
Export Standard Packing
1762*1134*35mm
China
8541430000
Product Description
| Model No. | RM-425W-182M/108T | RM-430W-182M/108T | RM-435W-182M/108T | RM-440W-182M/108T | RM-445W-182M/108T |
| Rated Maximum Power at STC | 425W | 430W | 435W | 440W | 445W |
| Open Circuit Voltage ( Voc) | 38.75V | 38.95V | 39.16V | 39.38V | 39.59V |
| Short Circuit Current (Isc) | 13.66A | 13.73A | 13.80A | 13.86A | 13.93A |
| Max. Power Voltage (Vmp) | 32.18V | 32.38V | 32.59V | 32.81V | 33.02V |
| Max. Power Current (Imp) | 13.21A | 13.28A | 13.35A | 13.41A | 13.48A |
| Module Efficiency | 21.27% | 21.52% | 21.77% | 22.02% | 22.27% |
| Rated Maximum Power at NOCT | 320W | 323W | 327W | 331W | 335W |
| Open Circuit Voltage ( Voc) | 36.81V | 37.00V | 37.20V | 37.41V | 37.61V |
| Short Circuit Current (Isc) | 11.03A | 11.09A | 11.14A | 11.19A | 11.25A |
| Max. Power Voltage (Vmp) | 29.99V | 30.10V | 30.33V | 30.56V | 30.76V |
| Max. Power Current (Imp) | 10.67A | 10.73A | 10.78A | 10.83A | 10.89A |
| Power Tolerance | 0~+3% | 0~+3% | 0~+3% | 0~+3% | 0~+3% |
| STC: Irradiance 1000W/m², Module Temperature 25°c, Air Mass 1.5 NOCT: Irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s. | |||||
| Temperature Coefficient | |||||
| Normal Operating Ccell Temperature | NOCT : 45±2°c | ||||
| Temperature Coefficient of Pmax | -0.29%ºC | ||||
| Temperature Coefficient of Voc | -0.25%ºC | ||||
| Temperature Coefficient of Isc | 0.045%ºC | ||||
| Working Conditions | |||||
| Maximum System Voltage | 1500V DC | ||||
| Operating Temperature | -40°c~+85°c | ||||
| Maximum Series Fuse | 25A | ||||
| Application Class | Class A | ||||
| Mechanical Parameters | |||||
| Glass thickness | 3.2mm | ||||
| Cell (quantity / material/dimensions) | 108 / N-TOPCon Mono / 182*91mm | ||||
| Encapsulant | EVA Film (Ethylene-Vinyl Acetate) | ||||
| Back Sheet (color) | White | ||||
| Frame (material / color) | Anodized Aluminum Alloy / Black color | ||||
| Junction Box | IP68 | ||||
| Cable & Connectors | Section Size: 4mm² , (+ ) 300mm, (-) 300mm & MC4 compatible | ||||
| Module Dimension | 1762×1134×35mm | ||||
| Module Weight | 22Kg | ||||
| Max. Load | Wind Load: 2400Pa / Snow Load: 5400Pa | ||||
1.Use anti-rust alloy and tempered glass to make energy storage safer and more reliable.2.Cells are protected for a longer service life.
3.All black color is available, new energy has a new fashion.
CELL
Increased the area exposed to light
Increased module power and reduced BOS cost
Increased the area exposed to light
Increased module power and reduced BOS cost
Module
Half cut,
Low power loss in cell connection
Lower hot spot temperature
Enhanced reliability
Better shading tolerance
GLASS
3.2 mm heat strengthened glass on front side
30 year module performance warranty
FRAME
35 mm anodized aluminium alloy:
Robust protection
Reserved mounting holes:
Easy installation
Less shading on back side:
Greater energy yield
Half cut,
Low power loss in cell connection
Lower hot spot temperature
Enhanced reliability
Better shading tolerance
GLASS
3.2 mm heat strengthened glass on front side
30 year module performance warranty
FRAME
35 mm anodized aluminium alloy:
Robust protection
Reserved mounting holes:
Easy installation
Less shading on back side:
Greater energy yield
JUNCTION BOX
IP68 split junction boxes:
Better heat dissipation & higher safety
Smaller size
No shading on cells & greater energy yield
CABLE
Optimised cable length: Simplified wire fix, reduced energy loss in cable
IP68 split junction boxes:
Better heat dissipation & higher safety
Smaller size
No shading on cells & greater energy yield
CABLE
Optimised cable length: Simplified wire fix, reduced energy loss in cable
F&Q1. When can I get the quotation?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2. How can I get a sample to check your quality?
After price confirmation, you can ask us to send samples, and we will charge sample fee and courier fee. But when your order quantity is much higher than MOQ, the fee can be refunded after order confirmed.
3. Can you do the design for us?
Yes. We have a professional team with rich design and manufacturing experience. Just tell us your idea, we will help you realize your idea. It's okay if you don't have someone to complete the file. Send us high resolution images, your logo and text and tell us how you would like them arranged. We will send the completed file to you for confirmation.
4. How soon can I get the samples?
After you pay the sample fee and send us confirmed files, the samples will be ready for delivery within 3-7 days. If you don't have an account, you can use your own express account or prepay us.
5. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time for MOQ is about 10 to 15 days. Generally, we recommend that you start your inquiry two months before the date you wish to obtain the product in your country.
6. What is your terms of delivery?
We accept EXW, FOB, C&F and CIF etc. You can choose the one that is most convenient or cost-effective.
