Audited Supplier
TOPRISE Flat Type Double Flaps
Aluminum Alloy
Automatic
Aluminum Alloy
Aluminum Alloy with Insulation
Classic
Vertical
Heat Insulation, Soundproof, Dust-proof, Smoke Exhaust and Release
Finished
A
Automatic Driven by Electric Actuator
Daily Ventilation and Skylight, Smoke Ventilation
Anodized or Powder Coating
Less Than 60s
505PA
1505PA
300 Degree
CE En12101-2
TOPRISE
Pallet
customized
China
7610100000
Product Description
* Window Frame: Thermal break and heat insulatedaluminum alloy profile+ aluminum alloy powder coated
outer cover. Skylight part is available in polycarbonate hollow sheet, tempered glass or aluminum alloy
insulation panel.
* Control system: 1) 24V safety voltage is used for electric opening. 2) two-wayscompressed air and carbon
dioxide emergency gas cylinder are used for pneumatic opening. It's equipped with fail-safe device.
* Customized size: 1m ≤ base width ≤ 2.3m, 1m ≤ base length ≤ 10m
Length can be customized.
TYPE | THROAT SIZE (W*L)mm | OUTLINE SIZE (W*L)mm | HEIGHT(mm) |
TOPWY-1015 | 1000*1500 | 1256*1756 | 500 |
TOPWY-1020 | 1000*2000 | 1256*2256 | 500 |
TOPWY-1520 | 1500*2000 | 1756*2256 | 645 |
TOPWY-1530 | 1500*3000 | 1756*3256 | 645 |
TOPWY-2030 | 2000*3000 | 2256*3256 | 645 |
* Reducing wind pressure resistance and increase natural lighting.
* Eliminating snow and water on surface, with better waterproof performance.
* The outer cover is powder coated with beautiful appearance.
* Structural waterproofing of frame profiles and integrated base.
* It can realize remote monitoring.
* K value: from 1.8 to 2.7 W m2/°K
* Reliability: Re 1000 cycles (smoke exhaust) or Re 20000 cycles (daily ventilation)
* Open within 60s
* Snow load: 500PA
* Resistance to heat: 300ºC 30mins
* Low ambient temperature: -25ºC
* Structural waterproofing design
* The polycarbonate sheet is easy to replace for free maintenance.
Q: Could you customize the size?
A: Yes, we can customize the size as per your requirement.
Q: What's your MOQ?
A: 10 units each size.
Q: Could you recommend the model and quantity?
A: Yes, we can design the model and quantity as per the warehouse dimension and warehouse type.
Q:How about the lead time?
A: Normally 2-3 weeks. It depends on the quantity and our production plan.
