| MODEL | PlusPRO 1-2000 |
| CAPACITY | 2KVA/1.8KW |
| INPUT |
| Voltage | 1 Phase 2 Wires with Ground 220/230/240Vac |
| Voltage Range | 100Vac-300Vac |
| Frequency | 50Hz or 60Hz (Auto-sensing) |
| THDi | <5% at full load |
| OUTPUT |
| Voltage | 220/230/240Vac |
| Voltage Regulation | +/-2% |
| Frequency (Battery Mode) | 50Hz or 60Hz +/-0.05Hz |
| Waveform | Pure Sinewave |
| THD | <1% (linear load), <5% (non-linear load) |
| Crest Ratio | 3 : 1 |
| EFFICIENCY |
| Inverter Mode | >90% |
| ECO Mode | >97% |
| BATTERY |
| Type | Maintenance free sealed lead-acid battery |
| Voltage | 48VDC |
| Capacity & Number | 12V/9AH*4pcs |
| Recharge Time | 4 hours to 90% |
| TRANSFER TIME |
| Battery Mode to Inverter Mode | 0ms |
| Inverter to Bypass | <4ms |
| DISPLAY |
| LCD Display | Input, Output, Load, Battery, Mode/Fault/Warning code, Inverter operating, Bypass operating, Output voltage and frequency and Bypass disable/enable selection information |
| AUDIBLE ALARM |
| Battery Mode | Beeps Every 4 Seconds |
| Low Battery | Sounding Every Second |
| Overload | Sounding Twice Every Second |
| Fault | Beeping continuously |
| COMMUNICATIONS |
| Interface Port | RS-232 port |
| ENVIRONMENT |
| Operating Temperature | 0°C-40°C (32°F-104°F) |
| Humidity | <95% (Non-condensing) |
| Acousitc Noise | <50dB at 1M |
| PHYSICAL |
| Dimension (D*W*H) | 405*195*330mm |