Audited Supplier
Technology Characteristics
1.Multichannel magnetic compensation feedback
2.Tiny misaligned currents 6.Low temperature drift
3.Superior linearity 7.High isolation withstand
4.Small error between input & output 8.Wide Frequency bandwidth
5.Fast response speed 9.High-resolution
Application
1.New energy detection 5.Battery pack detection
2.Power electronic measurement 6.Industrial control and measurement
3.Medical facility 7.Standard for laboratory testing
4.ail traffic 8.Instrument calibration
Certificate
1.RoHS/REACH compliance
2.CE certificate
3.UL flame retardant rating 94-V0( For the housing)
Electrical performance
| Type | Symbol | Test condition | Min | Rated | Max | Unit | |
| Measuring range | IPM | -- | ±20 | ±30 | Adc | ||
| Power supply | Vc | Full range | ±12 | ±15 | ±15.5 | Vdc | |
| Current consumption | Ic | Within the IPM range | ±15 | ±55 | ±75 | mA | |
| Ratio | KN | Input/Output | 500/1 | -- | |||
| Rated output current | ISN | Primary rated current | -- | ±40 | -- | mA | |
| Measuring resistance | RM | Refer to Pic.1 | -- | 150 | -- | Ω | |
| Precision | Xe | 25±10ºC | -- | -- | 0.05 | % | |
| Linearity | εL | -- | -- | -- | 0.02 | % | |
| Temperature drift coefficient | TCR | -- | -- | -- | 0.1 | ppm/ºC | |
| Zero offset current | Io | 25±10ºC | -- | -- | ±20 | uA | |
| Zero offset current | IoT | Full operating temperature range | -- | -- | ±50 | uA | |
| Ripple current | In | DC~10Hz | -- | -- | 2 | uA | |
| Dynamic response time | tr | 5% IPN up to 90%IPN | -- | -- | 1 | uA | |
| di/dt accurately followed | di/dt | -- | 200 | -- | -- | A/us | |
| Frequency bandwidth(- 3 dB) | F | -- | 0 | -- | 100 | kHz | |
General characteristic
| Type | Symbol | Test condition | Min | Nominal | Max | Unit |
| Operating temperature range | TA | -- | -40 | -- | +85 | ºC |
| Storage temperature range | TS | -- | -55 | -- | +100 | ºC |
| Output status indication signal | -- | When the output status indicator light (green LED) is on, it means that the product works normally, and the input current of the busbar does not exceed its bearing capacity; When the output status indicator light is off, it indicates that the product is not working properly or the input current value of the busbar is beyond its capacity. | ||||
| Type | Symbol | Test condition | Min | Nominal | Max | Unit | |
| Isolated voltage withstand | Between the primary and secondary | Vd | 50Hz,1min | -- | 5 | -- | kV |
| Transient isolation withstand voltage | Between the primary and secondary | Vw | 50uS | -- | 10 | -- | kV |
This product is molded part, ABS material, tolerance of shape and dimensions in accordance with GB/T14486-2008 MT6.
Lead wire output type, wire: 1332-20AWG/19-0.185TS/0D1.56, connected to XHB-4Y bayonet terminal.
