Audited Supplier
601B
Electronic
-
-
-
-
-
-
5000 Piece/Pieces Per Month
1 - 1000/>1000
20/to Be Negotiated
/
Carton + Pallet
customization
China
7019909990
Product Description
Product Description
PPLICATIONMoisture holders are used to take out the moisture of the air that enters the expansion vessel when the transformer is operating. In this way it hinders water condensation in the expansion vessel and operation safety of the transformer is increased.
CONSTRUCTION
Moisture holders of 0,5-1 kg (Form A,B,C) The top and the bottom sections are casted aluminum and electrostatic powder painted. The shafts are made of nickel plated steel and the sieves are made of zinc sheet. Container cylinder is glass or polycarbonate depending on the customers' request. Oil bowl is of polycarbonate and the bowl holder is made of CrNi material.
OPERATION PRINCIPLE
When the transformer gets air in, an air flow from and to the
oil bowl occurs. The oil layer in the bowl prevents the dryer material from continuous contact with the damp external
air and cleans the air flowing in. If the operation temperature of the transformer decreases, the volume of the isolation oil gets smaller. During this lessening, an amount of air equal to the lessening amount is absorbed in to the oil bowl through air holes. This air then transfers to the expansion vessel and contacts with the oil layer. During this transfer, air contacts with the dryer material and leaves its moisture there. With the heating of the oil in the transformer tank, the air inside flows out from the opposite direction of the moisture holder.
Technical Specification
oil bowl occurs. The oil layer in the bowl prevents the dryer material from continuous contact with the damp external
air and cleans the air flowing in. If the operation temperature of the transformer decreases, the volume of the isolation oil gets smaller. During this lessening, an amount of air equal to the lessening amount is absorbed in to the oil bowl through air holes. This air then transfers to the expansion vessel and contacts with the oil layer. During this transfer, air contacts with the dryer material and leaves its moisture there. With the heating of the oil in the transformer tank, the air inside flows out from the opposite direction of the moisture holder.
Technical Specification
TYPE / FORM | CODE NO | SILICAGEL CAPACITY (Kg) | TRANSFORMER OIL CAPACITY (Max.) (Kg) | |
MH 0,5 kg (DIN 42 567) | FORM A | 611A | 0.5 | 1800 |
FORM B | 611B | |||
FORM C | 611C | |||
MH 1,0 kg (DIN 42 567) | FORM A | 621A | 1.0 | 3600 |
FORM B | 621B | |||
FORM C | 621C | |||
MH 0.15 Kg | 601B | 0.15 | 600 | |
MH 1.2 Kg (DIN 42562) | 641 | 1.2 | 4500 | |
MH 2.4 Kg (DIN 42562) | 651 | 2.4 | 9000 | |
MH 3.6 Kg (DIN 42562) | 361 | 3.6 | 13500 | |
MH 4.8 Kg (DIN 42562) | 671 | 4.8 | 18000 | |
Products Show
Click here if you have any questions, we will give you the most satisfactory answer.
Packing & Delivery
Factory
Cooperator
FAQ
1.Q:What's your main products?
A: We provide professional Transformer Accessories and Insulation Materials with 15 years experience.
Thank you for reading, click here to consult more product information.2.Q Why chooses us?
A: Well experienced in our field. Our staff of engineers offers high-valued design guidance to
assure product performance and efficiency. And our strict adherence to rigorous quality control and tolerance standards lead to easier assembly of finished components at your facility. We always focus on Quality.
assure product performance and efficiency. And our strict adherence to rigorous quality control and tolerance standards lead to easier assembly of finished components at your facility. We always focus on Quality.
3. Q:How can you control your quality?
A:For each production processing, we have complete QC system for the chemical composition, physical and electrical properties.After production, all the goods will be tested according to related standards, and the ex-factory test reports will be sent along with shipment documents.
4. Q: Does your company accept customization?
A. Yes, we can accept OEM/ODM.
5.Q: Do you have the products instock?
A: Depends on your request,we have standard models in stock.Some special product and big order will be newly produced according to your order.
6. Q: What's your payment terms?
A: We usually accept all kinds of payment terms, T/T, L/C, Western union, Cash.
7. Q: What do you have for certificate?
A: :Quality Service Credit Certificate, Enterprise Credit Grade Certificate,Credit Operation Demonstration Unit Certificate, Quality Management System Certificate, etc.
8.Q:Can we visit your company?
A:Yes,for sure, you are welcome to visit our company.
