Audited Supplier
EN-transformer
1450mm
1000mm
34/125/240
1500
1200
1450
800-1500
5.5kw
40 Multiply 40 Multiply 1500
Automatic
CE, ISO
EN-SOURCE
Wooden Package
300-1300mm
China, Zhejiang
85041900
Product Description
Transformer Coil Winding Machine Manual Production Line
I. Manual Wire Winding Machine Introduction:
Transformer Coil Winding Machine Manual Production Line is widely used to wind various sizes of small and medium-sized transformer coils, with simple operation method. When the machine tool is connected to the power supply (three-phase AC 380V), the change-over switch is activated and the power indicator light is on, indicating that the machine tool has been powered on. At this point, as long as the operator treads on the foot switch, the winding machine can start operation. The gearbox of this machine tool adopts gear shifting, with controlled by AC frequency converter. It consists of a gearbox and a tailstock and tailstock track. The worm gear in the gearbox is made of rare earth aluminum alloy material, with strong wear resistance. Worm-gear transmission has a good self-locking feature. If the gear shift is needed, you only need to shift to the desired gear by a fork handle, to achieve a reasonable speed. The machine starts steadily, with stable braking performance, low noise, and convenient and flexible operation.
II.Coil Winding Machine Main Technical Parameters:
III. Contact Infomation:
I. Manual Wire Winding Machine Introduction:
Transformer Coil Winding Machine Manual Production Line is widely used to wind various sizes of small and medium-sized transformer coils, with simple operation method. When the machine tool is connected to the power supply (three-phase AC 380V), the change-over switch is activated and the power indicator light is on, indicating that the machine tool has been powered on. At this point, as long as the operator treads on the foot switch, the winding machine can start operation. The gearbox of this machine tool adopts gear shifting, with controlled by AC frequency converter. It consists of a gearbox and a tailstock and tailstock track. The worm gear in the gearbox is made of rare earth aluminum alloy material, with strong wear resistance. Worm-gear transmission has a good self-locking feature. If the gear shift is needed, you only need to shift to the desired gear by a fork handle, to achieve a reasonable speed. The machine starts steadily, with stable braking performance, low noise, and convenient and flexible operation.
II.Coil Winding Machine Main Technical Parameters:
| Item | Parameters |
| DYJ-1500 | |
| Winding speed (r/min) | 34/125/240 |
| Maximum torque (N.m) | 1500 |
| Maximum load (kg) | 1200 |
| Accessories Long axis | 40×40×1500 |
| Accessories Short axis | 40×40×1000 |
| Winding width (max.) (mm) | 1450 |
| The motor speed | 1450 |
| Tailstock adjusting range | 800~1500 |
| Center height (mm) | 1000 |
| Total weight (kg) | 1000 |
| Power of motor (kw) | 5.5 |
| Counter by electronic reversible counter (with blackouts memory function) | |
| The features of the machine: 1.the 3-gear mechanical gear shift, plus frequency conversion and stepless speed regulation 2.with two-stage speed control, inertial parking can be controlled within 0.3 turns | |
| AC motor selection:shanghai chunsheng Inverter: Yineng Counter:taiwan fanda | |
III. Contact Infomation:
