Audited Supplier
RoHS, CE, ISO9001
Medium Pressure
Normal Temperature
Double Acting
Straight Trip
Regulated Type
Piston Type
Carbon Steel
Hydraulic Hoist Kit
Accept OEM
3-10 Tons
12VDC 24VDC
Steel
Hallite
Mounting Brackets
ISO9001, CE
Wooden Box, Plywood Pallet
402*340*391
China
Product Description
Hydraulic scissor hoist kit for Tipper trailer/Dump truckHydraulic scissor hoist kitApplication: Tipper trailer, dump truck etc.
Load capacity: 1-10 tons
Complete kit including 1 set hoist frame, 1 pc hydraulic
cylinder, 1 set hydraulic power unit, 2 pcs hoses and connectors.
cylinder, 1 set hydraulic power unit, 2 pcs hoses and connectors.
PS: We can also provide the Hinges, Safety Arm, Battery Cables, Rubber Battery Strap.
Hoist Mechanism,Dimensions & Mass(appros.)
Hoist Cylinder and Pump Combination Specification (approx.)
Hoist Mounting and Maximum Lifting Capacity
Q1:What's the brand name of your products ?
Q2:Hydraulic cylinder internal leakage?
Q3:Does your piston rod get ruptured easily?
WE HAVE NEVER RECEIVED EVEN ONCE QUALITY COMPLAINT FOR MANY YEARS OF INTERNATIONAL TRADE.
Hoist Mechanism,Dimensions & Mass(appros.)
| L(mm) | W(mm) | H(mm) | X(mm) | MASS(kg) |
| 1180 | 402 | 340 | 391 | 120 |
Model | Recommended Gross Vehicle Mass | Cabin Length | Rear overhang length | Distance between load centre and hinge | Distance between trunnion and height | Rated lifting capacity | Design maximum lifting capacity and angle |
| KRM92-1 | 4000-5000 | 3100 | 340 | 1210 | 1270 | 2000-3000 | 60/5500 |
| KRM200-48 | 28000-35000 | 8000 | 1000 | 2000 | 3380 | 18000-25000 | 53/35000 |
| KRM143B | 6000-9000 | 3400 | 400 | 1300 | 1100 | 4000-5000 | 60/8500 |
| KRM160C | 11000-17000 | 4500 | 750 | 1500 | 2050 | 6000-8000 | 52/16000 |
| KRM160S | 8000-11000 | 3800 | 600 | 1300 | 1400 | 6000-8000 | 52/11000 |
| KRM220 | 20000-39000 | 8000 | 1200 | 3000 | 3630 | 20000-29000 | 47/39000 |
| KRM183 | 21000-29000 | 5300 | 900 | 1750 | 2480 | 15000-17000 | 53/27000 |
Hoist Cylinder and Pump Combination Specification (approx.)
Hoist Cylinder KRM143 | Working Pressure (MPa) (Kgf/cm2) | 6.4 | Gear Pump KP-55 | Standard Revolution (rpm) | 800 |
| 65 | 55 | ||||
| Inner Diameter (mm) | 140 | Discharge Volume(ml/rev.) | 20.6 | ||
| Stroke (mm) | 520 | Max. Testing Pressure (MPa) (Kgf/cm2) | |||
| Min. Close distance (mm) | 795 | 210 | |||
| Piston Rod Diameter (mm) | 70 | Weight(kg) | 13 | ||
| Max. pressure (MPa) (Kgf/cm2) | 14.7 | ||||
| 150 |
Hoist Mounting and Maximum Lifting Capacity
| Recommended Truck G.W.(kg) | Body Length(mm) | Rear Overhang(mm) | Distance between Load Center to Hinge(mm) | Distance between trunion to Hinge(mm) | Rated Lifting Capacity(kg) | Designed Max. lifting Capacity(kg) (including load weight) |
| 6000-9000 | 3400 | 400 | 1300 | 1100 | 4000-5000 | 8500/60° |
Q1:What's the brand name of your products ? A:Generally,we use our own brand "East-Ai",OEM is also available as required.
Q2:Hydraulic cylinder internal leakage?
A: There are 3 main reasons causing internal leakage :Overload,polishing is not well
controlled,bad seal kits.As is known to all,vehicles in China are often overload,our products all designed to bear the overload power.We have numerical control machine to assure the polish processing .And we use the imported seals to meet customers' demands.
controlled,bad seal kits.As is known to all,vehicles in China are often overload,our products all designed to bear the overload power.We have numerical control machine to assure the polish processing .And we use the imported seals to meet customers' demands.
Q3:Does your piston rod get ruptured easily?
A: Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness.
Q4:Is your design reasonable? What about your product safe coefficient?
A:We have R&D team with abundant design experience. We also established production, education, and research cooperation with universities . Rest assured.
Q5:What about the quality feedback of your products?
A: Guarantee the quality from the raw material. We have cold drawing production line and nickel-chrome electroplating production line , so we can produce cold-drawing pipe and hard-chrome pipe used for hydraulic cylinder. !!!
WE HAVE NEVER RECEIVED EVEN ONCE QUALITY COMPLAINT FOR MANY YEARS OF INTERNATIONAL TRADE.
Q6:Is the sample free?
A:Yes.In our acceptable range, we can offer a sample by charging freight. And we will return the fee after you place bulk order.
Q7:How about the delivery time?
A: Over 700 sets advanced equipments to meet customer's large demand in short delivery time.Generally ,it's 7-15 days.
Q8:What 's the after-service? A:If the quality can't meet your requirement ,we will pay all your lost and offer technical support to solve your problem!!!
Q9:How can I contact with you ?
