Audited Supplier
3150/5000
Metal /Copper/Aluminum
Forging
Forging
Auto Parts
Steel
Annealing
Sand Blasting
+/-0.2mm
GB
CE, ISO 9001:2000
5000/3150 kN
25 MPa
5000 kN
3150 kN
1100 mm
450 mm
300 mm
XUZHOUPRESS
Iron Pallet Packing
500ton/315ton
Xuzhou
8462119000
Product Description
Application :
It is mainly applied to the forging process of automobile left and right brake S-CAM Shafts . It is also suitable for the mold forging procesing of the end and middle of the long rod and long pipe material.
Features :
* This machine adopts the whole frame type structure, with compact structure and reasonable layout, which convenient for operation and maintenance.
* The molds have long service life and low damage rate.
* Higher production efficiency .
* Electrical energy saving .
Technology process :
* Raw material rod Heating ---
* Putting the heated rod into the moulds---
* Vertical cylinder clamping for upper&lower moulds closing and hold pressure ---
* Horizontal cylinder extrusion and forging ---
* Horizontal cylinder return and presure release -
* Moulds of vertical cylinder presure release and return -
* Spray cooling lubricant and blow air ---
* Take out the finished rough S-cam ---
* One completed cycle finished .
It is mainly applied to the forging process of automobile left and right brake S-CAM Shafts . It is also suitable for the mold forging procesing of the end and middle of the long rod and long pipe material.
Features :
* This machine adopts the whole frame type structure, with compact structure and reasonable layout, which convenient for operation and maintenance.
* The molds have long service life and low damage rate.
* Higher production efficiency .
* Electrical energy saving .
Technology process :
* Raw material rod Heating ---
* Putting the heated rod into the moulds---
* Vertical cylinder clamping for upper&lower moulds closing and hold pressure ---
* Horizontal cylinder extrusion and forging ---
* Horizontal cylinder return and presure release -
* Moulds of vertical cylinder presure release and return -
* Spray cooling lubricant and blow air ---
* Take out the finished rough S-cam ---
* One completed cycle finished .
* Customer Customized Case
* Provide Customized Personalized Service
| No. | Item | Unit | Parameter | |
| 1 | Nominal force | KN | 3150/5000 | |
| 2 | Maximum working pressure of liquid | MPa | 25 | |
| 3 | Closing (Vertical ) cylinder pressure | KN | 5000 | |
| 4 | Extrusion (horizontal ) cylinder pressure | KN | 3150 | |
| 6 | Maximum opening height of upper and lower mold base | mm | 360 | |
| 7 | Stroke of Closing (Vertical ) cylinder | mm | 400 | |
| 8 | Extrusion (horizontal ) cylinder cylinder stroke | mm | 250 | |
| 10 | Distance between extrusion slider and center of closing cylinder | mm | 550 | |
| 11 | Distance between the center of the closing cylinder and the inner right of the body | mm | 880 | |
| 12 | Mold base length | mm | 500 | |
| 13 | Maximum length of S-cam rod | mm | 1100 | |
| 14 | Closing (Vertical ) cylinder speed | Quick downward | mm/s | 150 |
| Working (Pressing ) | mm/s | 37~15 | ||
| Return | mm/s | 150 | ||
| 15 | Extrusion (horizontal )cylinder speed | Forward | mm/s | 60~24 |
| Return | mm/s | 150 | ||
| 16 | Main motor power approx (about ) | kW | 74 | |
