Audited Supplier
560DE
Double-End
High Pressure Mechanical Seals
General Speed Mechanical Seal
Temperature Mechanical Seal
High Pressure
Standard
Double Mechanical Seal
Standard
Tsurumi Pump Seal
Ebara Pump Seal
Double Seal
Submersible Pump Seal
Water Pump Seal
Koshin Pump Seal
Shaft Seal
560d
Double End Seal
Single Pump Seal
H-60 Seal
H-70 Mechanical Seal
Mechanical Seal
Submersible Pump Mechanical Seal
Trisun Pump Seal
Trisun
Neutral Packing
all sizes
China
84842000
Product Description
DOUBLE SEAL for Submersible pumps HANJIN Series 2921/ 2924 / 2926, Ebara, Tsurumi, GPM, BJM pumps.
14MM 20MM 25MM 30MM 40MM 45MM Ebara and Tsurumi OEM REPLACEMENT
Type A(20mm, 25mm, 30mm, 35mm) double seal for Ebara DS, DVS, DL, DL W/C submersible pumps;
Type A(40mm and 45mm) double seal for Ebara DL and DL W/C submersible pumps;
Type EAN (30mm, 40mm and 45mm) double seal for Ebara DML and DMLV submersible pumps, a stepped shaft, one end size is small and the other end size is bigger.
TSURUMI HT-2530N, HT-3035N, HT-3540N,HT-4550N(TS560D-45P) double mechanical seal VGM562, one end size smaller and the other end side bigger.
double mechanical seal for Tsurumi LH,KRS,KTZ,SQ,TRN2 waste water pumps and other major brands,
available with seal faces in silicon carbide, tungsten carbide, carbon, ceramic and the elastomer in NBR, EPDM and Viton.
It has two versions: both ends have same sizes or the two ends have different sizes.
If you need two ends with different sizes, such as one end is 30mm and the other end is 35mm, pls. tell me in advance.
W-14HL/025-290-19----------14mm
HT-2530N/025-000-01, 025-302-15---------------25/30mm
H-30/025-194-12------------------------------------------30mm
HT-3035N/025-000-02, 025-303-16---------------30/35mm
H-36/025-195-13-----------------------------------------35mm
HT-3540N/025-000-03, 025-304-17----------------35/40mm
HT4550N, 025-000-04, 025-305-18-----------------45/50mm
H-50T/025-268-18-----------------------------------------50mm
H-60/025-199-17-------------------------------------------60mm
H-70/025-200-12-------------------------------------------70mm
14MM 20MM 25MM 30MM 40MM 45MM Ebara and Tsurumi OEM REPLACEMENT
Type A(20mm, 25mm, 30mm, 35mm) double seal for Ebara DS, DVS, DL, DL W/C submersible pumps;
Type A(40mm and 45mm) double seal for Ebara DL and DL W/C submersible pumps;
Type EAN (30mm, 40mm and 45mm) double seal for Ebara DML and DMLV submersible pumps, a stepped shaft, one end size is small and the other end size is bigger.
TSURUMI HT-2530N, HT-3035N, HT-3540N,HT-4550N(TS560D-45P) double mechanical seal VGM562, one end size smaller and the other end side bigger.
double mechanical seal for Tsurumi LH,KRS,KTZ,SQ,TRN2 waste water pumps and other major brands,
available with seal faces in silicon carbide, tungsten carbide, carbon, ceramic and the elastomer in NBR, EPDM and Viton.
It has two versions: both ends have same sizes or the two ends have different sizes.
If you need two ends with different sizes, such as one end is 30mm and the other end is 35mm, pls. tell me in advance.
W-14HL/025-290-19----------14mm
HT-2530N/025-000-01, 025-302-15---------------25/30mm
H-30/025-194-12------------------------------------------30mm
HT-3035N/025-000-02, 025-303-16---------------30/35mm
H-36/025-195-13-----------------------------------------35mm
HT-3540N/025-000-03, 025-304-17----------------35/40mm
HT4550N, 025-000-04, 025-305-18-----------------45/50mm
H-50T/025-268-18-----------------------------------------50mm
H-60/025-199-17-------------------------------------------60mm
H-70/025-200-12-------------------------------------------70mm
| Reference Seal | Shaft Diameter |
| TS-W-14-HL | 14 |
| TS-W-14-VL | 14 |
| TS-H20T | 20 |
| TS-H25 | 25 |
| TS-H30T | 30 |
| TS-H35 | 35 |
| TS-H40 | 40 |
| TS-H45 | 45 |
