Audited Supplier
JD0204 Filling machine , Mainly used for heating element industry more than 2 Meter of magnesium oxide powder filling operation processes;
Tubular heater filling machines are used for the filling of magnesium oxide powder(mgo) in all kinds of tubes. They are used not only to ensure the filling density of MgO,but also to center the resistance wire in the tube.
The function of all kinds of powder filling machines are the same,and the goal can be summarized as "center,solid and fast."
- Center means after filling the powder,the resistance wire must be guaranteed in the center of the metal tube.
- Solid means the filling density of magnesium oxide powder must be high.
- Fast means that the process operation is simple,fast and efficient.
Functions:
1.Man-machine interface control, operation and convenient control.
2.Guide tube -down control in several ways, the length , time and position sensors, fall accurate location.
3.Choose two procedures: the lower part can be clamped or not clamped to filling MgO powder .
4.Fall powder time controllable, reduce waste.
5.Guide tube delay rise when fall powder,Not yet reached the bottom of the tube while preventing MgO has left the nozzle.
6.Terminal pin ejection optional , to prevent terminal pin bend.
7.Follow controllable,can off follow, as a fixed oscillator to use (this feature is only for follow machine).
8.Workflow monitoring equipment.
9.Equipment failure prompts.
10.Equipment each time data monitoring main action;
11.PLC I / O point monitoring.
Main technical parameter :
1. Powder supply:monophase220V/50Hz,2.5kW
2. Air supply:0.5~0.7MPa
3. Pipe diameter:φ6~φ20(customize)
4. Station:12~24pcs(according pipe diameter ,customize)
5. Filling powder up speed:300~350mm/min(Adjustable Frequency)
6. Oscillation mode:
l Electromagnetic or motor(Optional).
l Follow up and down can be controlled fixed.
7. Filling density:≥2.25/cm3
8. Core rod drive mode (drawing rising): cylinder drive.
9. Guide tube-driven approach (guide tube up, down): frequency motor.
10.Centering type:
l Single guide tube(Nozzle,single )
l Double guide tube(Jet nozzle,double)
11.Control: Human Interface.
12.Output:about3500/8h(according 24station 800mm calculate)
13.Size:
Main models : | ||||
Model | pipe length | Frame Structure | Size(L*W*H)mm | Weight(kg) |
JD0202-20 | 800~2000 | Double Column | 1000×1200×6000 | 950 |
JD0202-25 | 800~2500 | Double Column | 1000×1200×7000 | 1000 |
JD0202-30 | 800~3000 | Double Column | 1000×1200×8000 | 1050 |
Workshop
