Audited Supplier
Operating Principle:
Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment.
Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a thorough inspection. If any items are damaged or missing, contact us.
Make sure the turbine flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine. Refer to the nameplate for your customized product's specification.
Measuring system
Application range | Liquid: water; diesel; gasoline (1) Without Impurity (2) Low viscosity |
| Measured Value | |
| Primary measured value | Flow Rate |
| Secondary measured value | Volume flow |
| Features | |
| Modular construction | The measurement system consists of a flow sensor and a signal converter. It is available as compact and as separate version. |
| Compact version converter | N Type: Pulse output without local display |
| A Type: 4‐20mA Output without local display | |
| B Type: Local Display; Lithium Battery Power; No Output | |
| C Type: Local Display; 24V DC Power; 4‐20mA Output;Optional Function: (1) Backup Power Supply: Lithium Battery (2) Modbus RS485 (3) Pulse Output | |
| Connection | Thread: DN4‐DN50 |
| Flange: DN15‐DN200 (DIN, ANSI, JIS) | |
| Wafer: DN15‐DN100 | |
| Measurement Ratio | Standard - 10:1; Optional: 20:1 |
