Audited Supplier
Twin conical screw barrel
Pipe Extruder
PVC
Twin-Screw
Automatic
Computerized
Customize
Nitriding Steel
0.5-0.8mm
HRC56-58
Bimetallic Twin Parallel Screw Barrel
ZHONGYANG
Slushing Oil Coated& Film Wrapped in Wooden Case
ISO 9001: 2008 approved
China
84779000
Product Description
Twin Conical Screw Barrel, PVC Pipe/Sheet Extrusion Bimetallic Parallel Twin Screw Barrel, double screw cylinder
Specification:
Diameter: D45mm-D200mm
L/D ratio: 16-35
Product classification
The compression ratio of screws can be designed according to different products and ingredients
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Exprienced manufacturer, focus on quality and service.
Specification:
Diameter: D45mm-D200mm
L/D ratio: 16-35
Product classification
The compression ratio of screws can be designed according to different products and ingredients
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Exprienced manufacturer, focus on quality and service.
