Audited Supplier
SDB40C/SDB40D
Polyurethanes/PU
Engineering Plastics
Thermoplastic Plastics
Injection
Yellow
15-20s
100-120s
160-200
35~46kg/M3
200~300kpa
Liquid
Foam Production
B2 or B3
for Free
shunda
200kg/Drum
Two components
China
39072090
Product Description
Blend Polyol SDB40C/SDB40D
Home Appliances used Rigid PU Foam
DESCRIPTION
SDB40C/SDB40D is mainly used for thermal insulation layer of the refrigerator and freezer. SDB40C is designed for cyclopentane material as the physical blowing agent, while SDB40D is designed for 141b as the physical blowing agent. It used together with isocyanate(PM-200) to make rigid PU foam through PU injection foam machine. The foam produced has the characteristics as following:
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Home Appliances used Rigid PU Foam
DESCRIPTION
SDB40C/SDB40D is mainly used for thermal insulation layer of the refrigerator and freezer. SDB40C is designed for cyclopentane material as the physical blowing agent, while SDB40D is designed for 141b as the physical blowing agent. It used together with isocyanate(PM-200) to make rigid PU foam through PU injection foam machine. The foam produced has the characteristics as following:
- Good flowing property
- The pore in the core of the foam is very less.
- Low thermal conductivity and so on.
| Physical Properities | Metric | Value | |
| Pentane | 141B | ||
| Thermal Conductivity (Average Temperature 10ºC) | W/(m.K) | 0.021 | 0.0195 |
| Compressive Strength | KPa | 130 | 110 |
| Dimensional Stability | -30ºC 24h | 1 1.5 | |
| 70ºC 24h | |||
| Core Density | kg/m3 | ≤38 | ≤35 |
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
