Audited Supplier
The DIT Series infrared thermometer is a two-color infrared thermometer protected from dust and spray by a NEMA 4 (IP66) rated casting. This pyrometer is ideally suitable for high temperature measurements and a good choice for molten metal, wire and rod forming, vacuum furnaces, induction heating and kiln applications.
The DIT two-color thermometer features an advanced electro-optical design, digital electronics and built-in user interface-all combined in a rugged, compact housing. DIT two-color thermometers are ideal in situations where the target may be obstructed by atmospheric smoke or other particulates, where the target is moving, or where the target is smaller than the field-of-view. DIT two-color thermometers allow users to switch between one-color and two-color operation, which simplifies setup and provides continued measurement flexibility. The 4-digit LED display provides a convenient on-line indicator of the thermometer's operating status and easy operation of setting the parameters.
The sensor features through-the-lens optical sighting. The optical resolution is 280:1 and the smallest spot size is 2mm. The emissivity is 0.10 to 1.00 in 0.01 increments and the slope is 0.850 to 1.150 in 0.001 increments.
DIT two-color thermometer can be equipped with a compact, value-priced monitor that configures the functions via the front panel. It also includes optional bidirectional RS485 serial communications between the thermometer on the factory floor and a personal computer in the control room. This enables remote setup, monitoring and maintenance, especially valuable for installation in hard-to-reach locations.
| Model | DIT-6H1 | DIT-6H2 | DIT-6H3 |
| Temperature range | 600-1400ºC | 800-1800ºC | 1000-3000ºC |
| Detector | Si 0.8-1.1μm | Si 0.4-1.1μm | Si 0.4-1.1μm |
| Accuracy | ±0.75%FS | ||
| Repeatability | 0.2% | ||
| Temperature resolution | 0.5ºC | ||
| Response time | <5ms | ||
| Emissivity | 0.10 - 1.00 adjustable (0.01) | ||
| D:S ratio | 280:1 | ||
| Minimum Spot size | 2mm | ||
| Measuring distance | 0.56m - ∞ | ||
| Analog output | 0-20mA /4-20mA, 0-5V | ||
| Digital output | RS485 | ||
| Power supply | 24VDC(±20%,500mA) | ||
| Anti Disturbance | JB/T9233.11-1999 | ||
| Thermal shock | GB/T 2423.1, GB/T2423.2 | ||
1) Are you a trading company or a manufacture factory?
