Audited Supplier
Introduction
Lupranate®M20S is a polymeric MDI with a functionality of approximately 2.7. Lupranate M20S is suitable for the production of rigid insulation foams by molding, spraying, and frothing. It is also used for rigid and semi-flexible integral skin foams, adhesives, sealants, elastomers, and high-resiliency flexible foams. Inlow catalyzed rigid urethane formulations, the foam rise time can be lengthened by 20-30%. The slower reactivity can be advanta- geous in applications such as large rigid foam panels or molded flexible foams.
| 1 | Appearance | Dark Brown Liquid |
| 2 | NCO Content, wt. % | 31.5 |
| 3 | Viscosity @ 25°C, cps | 200 |
| 4 | Hydrolyzable Chlorine, wt. % | 0.035 |
| 5 | Flash Point, °C (COC) | 200 |
| 6 | Density @ 25°C, g/cm3 | 1.23 |
| 7 | Initial Boiling Point, 5 mm Hg, °C | 190 |
| 8 | Vapor Pressure @ 25 °C, mm Hg | 0.0002 |
Isocyanates MDI is extensively application in most of field, such as thermal insulation rigid foam, polyurethane (PU) coating, polyurethane (PU) adhesive, Seepage-proofing, structure foam, sealants, microcellular integral skin foams,automobile bumper, high resilience etc.With good performance such as very good fluidity, very good foaming capacity, strength well, dimension stability etc.
Packaging
250kg/drum ,12500kgs/ IBC
Shelf Life
The shelf life of Lupranate M20S is six months if the temperature is maintained at 15-35°C and moisture is excluded.
Storage
Lupranate M20S is supplied in tank cars, tank trucks, and drums. Once a container has been opened, care should be taken to exclude
moisture. The most favorable temperature for storage is 15-35°C. If stored at higher temperatures, or if moisture is not excluded, an
undesirable increase in viscosity will occur. Below 15°C, the product becomes difficult to pump and pour. Below 0°C, crystallization may
occur.
Warning
These products can be used to prepare a varietyofpolyurethaneproducts.Polyurethanesare organic materials and must be considered
combustible.
