Audited Supplier
two phase hybrid stepping motor drive HBQ2044D
Features
High performance,low price
Special control circuit,greatly reduce noise,increase steadiness
Upmost response frequence amounts to 200Kpps
Once the pulse stops for 100ms,the phase current will automatically cut by half
Bipolar constant current chopper control
Photocoupler isolated input/output
Drive current range from 1.0A/phase~4.2A/phase
Can match two phase hybrid step motors whose rated current under4.0A
Single power input, voltage range from DC 20-50V
Protection circuit
Overheat protection
Overcurrent,under voltage protection
Small in size
Subdivision(micro step) Setting
The subdivision is set by DIP switches SW5 to SW8, 16 channels in total.
Subdivision (micro step) ppr | 200 | 400 | 800 | 1600 | 3200 | 6400 | 12800 | 25600 |
SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
SW8 | ON | ON | ON | ON | ON | ON | ON | ON |
Subdivision (micro step) ppr | 1000 | 2000 | 4000 | 5000 | 8000 | 10000 | 20000 | 40000 |
SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
SW8 | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
Q1. Are you factory?
Yes, we are factory and we produce stepper motor/driver, Servo motor/driver and spindle servo motor for more than 14 years in China. MIGE is our registered brand.
Q2. What are your products can be use to?
A: Our products can be use in CNC routers ,CNC milling machine ,engraving machine, packaging machine, filling machine, cutting machine, printing machine, laser machine, carving machine, labeling machine, textile machine and so on.
Q3: What kind of shipping methods do you use?
A:1)For samples or small batch , air shipping is recommended . (DHL,Fedex,TNT UPS ,EMS or Aramex) ,We will provide the tracking No. Once we get it after we ship out the products.
2)For mass production or big batch, ocean shippinga shipment is recommended .
Q4: What is the lead time of my products?
A: Lead time : For standard samples , 2-5 days will be OK .
For mass production , the lead time depend on the quantities you need .
Q5: What is your warranty time?
A:12 months. And we provide life-long technical service and after-sale service.
