Audited Supplier
U-shaped wire brush for high-voltage cable Live wo
Cold Pressing
GB
Substation Fittings, Line Fittings
Protection Fittings
C-Type Insulating Rod Type Cleaning Brush for Liv
Clean The Oxide Layer and Foreign Matters on The W
Used for Live Line Cleaning of Conductors by Insul
35-330kv
FRP Tube, Super Epoxy Non-Alkali Fiberglass Fabric
XINCHENG
Pallet
SET
China
Product Description
Details:
Place of Origin: China Brand Name: XINCHENG
Product name: C-type insulating rod type cleaning brush for live line conductor
Use: Clean the oxide layer and foreign matters on the wire surface
Application: used for live line cleaning of conductors by insulating pole operation method of distribution lines
Rated Voltage: 35-330KV Brush material: stainless steel
The material operating rod: FRP tube, Super Epoxy Non-alkali Fiberglass Fabric Tube
Rod length: 1m, 2m, 3m or customized. Customized support: OEM, ODM
Relative humidity: No more than 75%
Color: Red, green, yellow or as per your requires Package: Portable bag, International Standard Package
Standard: GB26860-20116.14.9, GB26860-2011 6.2.2
Product Description:
It is mainly composed of brush head and insulating operating rod. Capable of completing live line cleaning under different power environments. Not only can the cleaning work be carried out smoothly, but also can ensure the power supply and improve the work efficiency by keeping the line power off. In addition, safety helmets are also required for cleaning operations under non live working conditions. Prevent unnecessary injury to human body due to residual current of equipment.
All brushes have stainless steel bristles, which will not rust and ensure the use effect.
The brush head is connected with the insulating rod by flange, and the angle can be adjusted freely as required, which is convenient for cleaning.
The insulating operating rod is made of epoxy glass fiber tube, which has excellent insulating performance and is easy to use. Multi section connection can be carried out according to different voltage levels to reach the length required by the insulation level.
There are two options for brush head, as shown in the figure below:
Application:
It is used for live line cleaning of conductors by insulating pole operation method of distribution lines.
The semicircle design fits the conductor more effectively, and the hard stainless steel wire bristles can effectively clean the oxide layer and foreign matters on the surface of the conductor.
Deposit:
The electric brush should be stored in a clean, dry, vertical suspension to prevent moisture and bending. The dirt of the used brush shall be cleaned with gasoline to ensure cleanness.
Inspection of cleaning brush:
AC withstand voltage test shall be conducted for insulated pipe once every six months. The working voltage is 110KV, and the voltage test lasts for 1 minute. If there is no flashover and heating, it is qualified.
The insulation resistance shall be measured with a 2500V megger. The distance between Jis shall be 20mm and not less than 100 megohms. If it is lower than this value, it shall be dried.
Static load test: it is qualified if the tool is free of deformation and damage under 2.5 times of allowable working load for 5min.
Dynamic load test: it is qualified if the tool is flexible, portable and free of jamming when it is actually operated for 3 times under 1.5 times of the allowable working load.
Performance test of high-voltage live cleaning machine:
The high-voltage live cleaning machine manufactured by our company has passed the electrical safety work procedures GB26860-20116.14.9. See the following table for the electrical test items and standards of insulation tools.
Test items and standards of insulating tools:
REMARKS: The brush rod shall be tested every half a year, stored in a dry place and kept clean. The test voltage is 110KV, the test voltage is 250KV, the 220KV voltage is 450KV, the effective length of 110KV is 1m, the effective length of 220KV is 1.8m, and the test time is 1min. The power frequency withstand voltage test is qualified if there is no breakdown, flashover and overheating.
Precautions for cleaning brush:
1. Before use, the insulation shall be checked to ensure that it is free from moisture. If it has not been used for a long time, it shall be dried and used after passing the test.
2. Under the operating environmental conditions, the live cleaning shall be carried out in sunny days, and the relative humidity of the air shall not be greater than 75% to prevent the insulation from being damped.
3. Keep the surface of the operating rod clean during use to avoid affecting the insulation.
4. During transportation, the brush head of insulating rod shall be protected from damage and dirt.
FAQ:
Q 1, Could you accept the sample order and if it is free ?
A Yes, we welcome the sample order to test and check quality. And the sample and the delivery fee are not free, as many samples are requested to be sent.
Q 2, How do you ship the goods and how long does it take to arrive?
A The sample is usually transported by DHL, Fedex, UPS or TNT express. We will choose the economical express and transport way according to the goods quantity, or as the requirements of client's . The express time is usually around 3-7 working days.
Q 3, Do you provide the customized service and OEM?
A Yes, it is available.
Q 4, How about the after sale service?
A Any questions, pls contact us freely! We will service you well !
Our supply ability: 250,000 Piece/Pieces per Month, More specific please contact us through email.
Our Services:
We are specialized in power and cable equipment and construction tools. According to customers' need, we can provide the most suitable products and solutions. Ensuring the quality of products, we organize production and make delivery in time, solve the guests' needs and problems perfectly.
Packaging & Delivery:
Packaging Details:
Suitable packing for export. Economic Packing design which will save your transportation cost, or as customer requirements
1. Inside packing: Anti-moisture nylon bag + Carton box + woven belt.
2. Outside packing: carton box or wooden case and pallet.
3. According customer requirement.
Port: Shanghai, Qingdao, Tianjin
Lead Time: 7-15days
Please Contact Us:
Miss: lydia
Mob: 86-13752439076 Fax: 86-22-60863016
Place of Origin: China Brand Name: XINCHENG
Product name: C-type insulating rod type cleaning brush for live line conductor
Use: Clean the oxide layer and foreign matters on the wire surface
Application: used for live line cleaning of conductors by insulating pole operation method of distribution lines
Rated Voltage: 35-330KV Brush material: stainless steel
The material operating rod: FRP tube, Super Epoxy Non-alkali Fiberglass Fabric Tube
Rod length: 1m, 2m, 3m or customized. Customized support: OEM, ODM
Relative humidity: No more than 75%
Color: Red, green, yellow or as per your requires Package: Portable bag, International Standard Package
Standard: GB26860-20116.14.9, GB26860-2011 6.2.2
Product Description:
It is mainly composed of brush head and insulating operating rod. Capable of completing live line cleaning under different power environments. Not only can the cleaning work be carried out smoothly, but also can ensure the power supply and improve the work efficiency by keeping the line power off. In addition, safety helmets are also required for cleaning operations under non live working conditions. Prevent unnecessary injury to human body due to residual current of equipment.
All brushes have stainless steel bristles, which will not rust and ensure the use effect.
The brush head is connected with the insulating rod by flange, and the angle can be adjusted freely as required, which is convenient for cleaning.
The insulating operating rod is made of epoxy glass fiber tube, which has excellent insulating performance and is easy to use. Multi section connection can be carried out according to different voltage levels to reach the length required by the insulation level.
There are two options for brush head, as shown in the figure below:
Application:
It is used for live line cleaning of conductors by insulating pole operation method of distribution lines.
The semicircle design fits the conductor more effectively, and the hard stainless steel wire bristles can effectively clean the oxide layer and foreign matters on the surface of the conductor.
Deposit:
The electric brush should be stored in a clean, dry, vertical suspension to prevent moisture and bending. The dirt of the used brush shall be cleaned with gasoline to ensure cleanness.
Inspection of cleaning brush:
AC withstand voltage test shall be conducted for insulated pipe once every six months. The working voltage is 110KV, and the voltage test lasts for 1 minute. If there is no flashover and heating, it is qualified.
The insulation resistance shall be measured with a 2500V megger. The distance between Jis shall be 20mm and not less than 100 megohms. If it is lower than this value, it shall be dried.
Static load test: it is qualified if the tool is free of deformation and damage under 2.5 times of allowable working load for 5min.
Dynamic load test: it is qualified if the tool is flexible, portable and free of jamming when it is actually operated for 3 times under 1.5 times of the allowable working load.
Performance test of high-voltage live cleaning machine:
The high-voltage live cleaning machine manufactured by our company has passed the electrical safety work procedures GB26860-20116.14.9. See the following table for the electrical test items and standards of insulation tools.
Test items and standards of insulating tools:
| Rated voltage (KV) | Test length(M) | 1min power frequency withstand voltage(KV) | |
| Delivery and type test | Preventive test | ||
| 35 | 0.6 | 150 | 95 |
| 30(66) | 0.7 | 175 | 175 |
| 110 | 1 | 250 | 220 |
| 220 | 1.8 | 450 | 450 |
Precautions for cleaning brush:
1. Before use, the insulation shall be checked to ensure that it is free from moisture. If it has not been used for a long time, it shall be dried and used after passing the test.
2. Under the operating environmental conditions, the live cleaning shall be carried out in sunny days, and the relative humidity of the air shall not be greater than 75% to prevent the insulation from being damped.
3. Keep the surface of the operating rod clean during use to avoid affecting the insulation.
4. During transportation, the brush head of insulating rod shall be protected from damage and dirt.
FAQ:
Q 1, Could you accept the sample order and if it is free ?
A Yes, we welcome the sample order to test and check quality. And the sample and the delivery fee are not free, as many samples are requested to be sent.
Q 2, How do you ship the goods and how long does it take to arrive?
A The sample is usually transported by DHL, Fedex, UPS or TNT express. We will choose the economical express and transport way according to the goods quantity, or as the requirements of client's . The express time is usually around 3-7 working days.
Q 3, Do you provide the customized service and OEM?
A Yes, it is available.
Q 4, How about the after sale service?
A Any questions, pls contact us freely! We will service you well !
Our supply ability: 250,000 Piece/Pieces per Month, More specific please contact us through email.
Our Services:
We are specialized in power and cable equipment and construction tools. According to customers' need, we can provide the most suitable products and solutions. Ensuring the quality of products, we organize production and make delivery in time, solve the guests' needs and problems perfectly.
Packaging & Delivery:
Packaging Details:
Suitable packing for export. Economic Packing design which will save your transportation cost, or as customer requirements
1. Inside packing: Anti-moisture nylon bag + Carton box + woven belt.
2. Outside packing: carton box or wooden case and pallet.
3. According customer requirement.
Port: Shanghai, Qingdao, Tianjin
Lead Time: 7-15days
Please Contact Us:
Miss: lydia
Mob: 86-13752439076 Fax: 86-22-60863016
