Audited Supplier
CL-HFT-OR
Automotive Harnessing, Communication industry, Machine Protection, Wire & Cable Protection, Electronics,Automobile,Wind Power,Machinery
Orange
Flexible
1.5mm-80mm,Accept Customization
PE
300V/600V
-
-40ºC-125ºC
-
-40ºC-125ºC
≥90ºC
≥125ºC
•UL224/ASTM D2671
RoHS,Reach,Elv
V0
Changli
Carton
Customizable
Changzhou
39173200
Product Description
Base Data| Item | CL-HFT-OR | |
| Continuus Temperature Range | -40ºC-125ºC | |
| Specifications | •UL224/ASTM D2671/UL 94 •EN45545 R22/23 HL3 •ROHS2.0,REACH,ELV,POPs,PAHs | |
| Radial Shrinking Ratio | 2:1,3:1 | |
| Recommended shrink temp. | 80ºC-120ºC | |
| Tensile Strength | ≥10.4MPa | |
| Elongation Ratio | ≥200% | |
| Volume Resistivity (Ω·cm) | IEC 60093 ≥1013 | |
| Dielectric Voltage Withstand | 600V | |
| Cold Bend | No cracking | |
| Heat Shock | No drops, no flowing and no cracking. | |
| Dielectric Strength(kv/mm) | ≥15k | |
| Features | •Irradiation crosslinked polyolefin material •Soft, Elastic & Environmental | |
| Size | As supplied(mm) | After full recovery | ||
| Inside diameter | Wall-thickness as supplied | Inside diameter | Wall-thickness | |
| Φ15/7.5 | 15.50±0.50 | 0.70±0.15 | ≤7.5 | 1.35±0.20 |
| Φ16/8 | 16.50±0.50 | 0.70±0.15 | ≤8.0 | 1.35±0.20 |
| Φ18/9 | 18.60±0.60 | 0.70±0.15 | ≤9.0 | 1.35±0.20 |
| Φ20/10 | 20.60±0.60 | 0.70±0.15 | ≤10.0 | 1.35±0.20 |
| Φ22/11 | 22.70±0.70 | 0.70±0.15 | ≤11.0 | 1.35±0.20 |
| Φ25/12.5 | 25.70±0.70 | 0.70±0.15 | ≤12.5 | 1.35±0.20 |
| Φ28/14 | 29.00±0.70 | 0.70±0.15 | ≤14.0 | 1.35±0.20 |
| Φ30.0/15 | 31.00±1.00 | 0.70±0.15 | ≤15.0 | 1.35±0.20 |
| Φ35/17.5 | 36.00±1.00 | 0.70±0.15 | ≤17.5 | 1.35±0.20 |
| Φ40.0/20 | 41.50±1.50 | 0.70±0.15 | ≤20.0 | 1.35±0.20 |
(Orders for products with special specifications are acceptable).
Application: The wire harnesses and flexible connections in new energy vehicles are mostly protected by orange heat shrink tubing, which has excellent insulation properties and fully meets industry standards.
Q: Are you a factory or a trading company?A: Our factory is located in Changzhou City, near Shanghai. Welcome to visit our company.
Q: Can I get samples?
A: If we have the samples you need in our stock, we can supply them, but postage could be paid by you. If you have cooperated with us, we can send samples free of charge.
If the samples you need is not in stock, we can also make it according to the drawings and requirements you provide. We will charge some sample preparation fee or mould fee. Our existing moulds are quite complete though.
Q: How about the payment?
A: T/T, L/C, ALI pay are accepted. Our customers usually pay 50% deposit in advance, then the balance pay before shipping.
Payment terms ae negotiable.
Q: What about the delivery time?
A: Conventional specification products will be returned on delivey date according to the quantity of orders.
Special specification products will be returned on delivery date according to the manufacturing time of the mould.
About 10-45 days after receiving deposit.
