Audited Supplier
JB-CIPP241129
10 Years
5 Years
Fiberglass Fabric
UV Cured Resin Hose
＜0.01%
0.4%~1.4%
81~130MPa
3-18mm
16000MPa
500MPa
160MPa
365~420nm
JUBO
Wooden Case
DN200-DN1800
China
3917320000
Product Description
UV-CIPP Cure in Place Pipeline Trenchless Repair Pipe
Products Introduction:
The self-developed UV-CRUable liner pipe is a dry hose made of glass fiber cloth and impregnated with UV-curable resin, which is mainly used for trenchless UV-curable pipeline repair and structural reinforcement of underground pipelines. When used, it needs to be pulled into the original pipeline, inflatable expansion close to the original pipeline, and then solidified under ultraviolet light to form a lining pipe with high strength.
At present, the workshop has high production efficiency, and a single shift can produce 250 meters, especially suitable for large-scale official website emergency project procurement. At present, the largest diameter DN1800 Lined hose, has realized the process breakthrough in the industry, non-standard diameter production experience, technology stability at the same time, quality assurance, short production cycle, domestic cities can reach the construction site in 7 days.
Products Feature:
The repaired pipeline structure meets or exceeds the strength, stability and deformation requirements
The repaired pipeline is smooth and meets the flow capacity requirements
The service life of the repaired pipeline is more than 50 years
Good ductility and fits the pipe wall
Good material stability, interruption of curing in the middle and restarting will not affect the curing effect
High cost performance compared to imported materials
Higher curing speed than imported materials, up to 2m/min
Product Parameter:
Remarks: Can accept customized.
Construction Site:
Certifications:
Our Factory:
UV-CIPP Cure in Place Pipeline Trenchless Repair Pipe
Used for drainage pipe repair of sewage, rainwater, etc. Used for pipe repair including different sections of round, rectangular, egg and so on. Meet the customized design and construction for non-standard and variable diameter pipelines in the project. The whole series are made of high-quality anti-corrosive glass fiber.
General Hose Parameters | |
Pipe diameter of hose | DN200-DN1800 |
Hose wall thickness | 3-18mm |
Elastic modulus | 17000MPa |
Bending strength | 500MPa |
Tensile strength | 160MPa |
Resin curing wavelength peak | 365~420nm |
Products Introduction:
The self-developed UV-CRUable liner pipe is a dry hose made of glass fiber cloth and impregnated with UV-curable resin, which is mainly used for trenchless UV-curable pipeline repair and structural reinforcement of underground pipelines. When used, it needs to be pulled into the original pipeline, inflatable expansion close to the original pipeline, and then solidified under ultraviolet light to form a lining pipe with high strength.
At present, the workshop has high production efficiency, and a single shift can produce 250 meters, especially suitable for large-scale official website emergency project procurement. At present, the largest diameter DN1800 Lined hose, has realized the process breakthrough in the industry, non-standard diameter production experience, technology stability at the same time, quality assurance, short production cycle, domestic cities can reach the construction site in 7 days.
Products Feature:
The repaired pipeline structure meets or exceeds the strength, stability and deformation requirements
The repaired pipeline is smooth and meets the flow capacity requirements
The service life of the repaired pipeline is more than 50 years
Good ductility and fits the pipe wall
Good material stability, interruption of curing in the middle and restarting will not affect the curing effect
High cost performance compared to imported materials
Higher curing speed than imported materials, up to 2m/min
Product Parameter:
| Test Item | Technical Requirements | Unit | Inspection Results |
| Bending strength at first break | > 125 | Mpa | 476 |
| Flexural modulus | > 8000 | Mpa | 17765 |
| Longitudinal tensile strength | > 80 | Mpa | 170 |
Construction Site:
Certifications:
Our Factory:
FAQ